NETGEAR Factory Reset and Default Password for WNDR3700 Router

Page 109

N600 Wireless Dual Band Gigabit Router WNDR3700v4

Factory Settings

You can return the router to its factory settings. Use the end of a paper clip or a similar object to press and hold the Restore Factory Settings button on the router for at least 5 seconds. The router resets, and returns to the factory configuration settings shown in the following table.

Table 2. Factory default settings

	Feature		Default behavior

	Router login	User login URL	www.routerlogin.com or www.routerlogin.net

		User name (case-sensitive)	admin

		Login password (case-sensitive)	password

	Internet	WAN MAC address	Use default hardware address
	connection
	connection	WAN MTU size	1500
		WAN MTU size	1500

		Port speed	AutoSensing

	Local network	LAN IP address	192.168.1.1
	(LAN)
	(LAN)	Subnet mask	255.255.255.0
		Subnet mask	255.255.255.0

		DHCP server	Enabled

		DHCP range	192.168.1.2 to 192.168.1.254

		Time zone	Pacific time

		Time zone daylight savings time	Disabled

		Allow a registrar to configure this	Enabled
		router
		DHCP starting IP address	192.168.1.2

		DHCP ending IP address	192.168.1.254

		DMZ	Disabled

		Time zone	GMT for WW except NA and GR, GMT+1 for GR, GMT-8
			for NA

		Time zone adjusted for daylight	Disabled
		savings time

	Firewall	Inbound (communications coming	Disabled (except traffic on port 80, the HTTP port)
		in from the Internet)
		Outbound (communications going	Enabled (all)
		out to the Internet)

		Source MAC filtering	Disabled

Supplemental Information

109

Image 109

Contents N600 Wireless Dual Band Gigabit Router WNDR3700v4 Compliance SupportTrademarks Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Getting to know your router Hardware SetupUnpack Your Router Hardware FeaturesFront Panel Icon Description Label Back PanelPosition Your Router Attach the StandCable Your Router Verify the Cabling Hardware Setup Getting Started with Netgear Genie Connecting the routerTypes of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpUpgrade the Firmware Use Netgear genie after InstallationBasic Home screen with dashboard, language, and online help Dashboard Basic Home ScreenWi-Fi Protected Setup WPS Method Join Your Wireless Network To use WPS to join the wireless network Manual MethodNetgear genie App and Mobile genie App Your Internet connection and network Netgear genie Basic Settings To view or change the basic Internet setup Internet SetupBasic Home Screen Does Your ISP Require a Login? Answer either yes or no Internet Setup Screen FieldsInternet IP Address  To go to the Attached Devices screen Attached DevicesParental Controls  To set up Live Parental ControlsNetgear genie Basic Settings Click the Take me to the status screen button ReadySHARE Storage To view or change basic wireless settings Basic Wireless SettingsWireless Network 2.4 GHz b/g/n and 5 GHz Wireless Settings Screen FieldsRegion Selection Security Options Settings Change WPA Security Option and Password To change the WPA settings Guest Networks  To set up a guest network Select Basic Guest NetworkWPA Encryption Guest Network Wireless Security OptionsNetgear genie Advanced Home Specify custom settings To use the Setup Wizard Setup WizardNetgear genie Advanced Home Screen  To use the WPS Wizard Select Advanced WPS Wizard WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup  To set up a default DMZ server Default DMZ ServerCommon MTU sizes Change the MTU Size To change the MTU size Select Advanced Setup WAN Setup LAN Setup To change the LAN settings LAN TCP/IP Setup LAN Setup Screen SettingsUse Router as a Dhcp Server Address Reservation Use the Router as a Dhcp ServerAddress Reservation Enable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To configure QoS  To reserve an IP addressQoS for Applications and Online Gaming Set Up QoS for Internet Access To create a QoS policy for applications and online games QoS for a Router LAN Port Select the Turn Internet Access QoS On check boxClick the Add Priority Rule button QoS for a MAC Address  To edit or delete a QoS policy Select Advanced QoS SetupEdit or Delete an Existing QoS Policy Click Add Priority RuleStorage Accessing and configuring a USB storage To access the USB device from Windows ReadySHARE AccessFile-Sharing Scenarios Share PhotosShare Large Files over the Internet Store Files in a Central Location for Printing To share files with your friends and family  To go to Storage Basic Settings Select Basic ReadySHARE Storage Basic Settings To access your USB device Select Basic ReadySHARE, and click Edit Add or Edit a Network Folder To go to USB Storage Advanced Settings Storage Advanced SettingsMedia Server Safely Remove a USB DriveAvailable Network Folders Select the Allow only approved devices check box Specify Approved USB Devices To connect to the router’s USB drive using a web browser Access the Router USB Drive Remotely Using FTPConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4Security Keep unwanted content out of yourSelect Advanced Security Block Sites Keyword Blocking of Http Traffic To delete a keyword or domain  To specify a trusted computer To block services Select Advanced Security Block Services Block Services Port FilteringSecurity  To schedule blocking Schedule BlockingSecurity Event Email Notifications Manage your network Administration To check for new firmware and update your router Router Information View Router StatusHardware Version. The router model LAN PortShow Statistics Button Internet PortConnection Status Button Wireless Settings 2.4 GHz and 5 GHzAdministration View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration FileRestore Configuration Settings ErasePassword Recovery Set PasswordCustomize your network Advanced SettingsAdvanced Wireless Settings Restrict Wireless Access by MAC Address  To restrict access based on MAC addresses Wireless APSelect the Turn Access Control On check box Select the Enable Access Point Mode check box Wireless Repeating Function WDSWireless repeating scenario Following settings are available  To view or change the Wireless Repeating Function settings To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Port Triggering Remote Computer Access BasicsDestination port number Port Triggering to Open Incoming PortsPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local ServersAdd a Custom Service Edit or Delete a Port Forwarding Entry Set Up Port TriggeringApplication Example Making a Local Web Server Public Advanced Settings Dynamic DNS Select the Use a Dynamic DNS Service check box  To set up Dynamic DNSStatic Routes  To set up a static route Remote Management Universal Plug and Play USB Settings To turn on Universal Plug and Play IPv6  To set up an IPv6 Internet connection typeAuto Detect Fields IPv6 LAN SetupIPv6 Filtering Auto Config Pass Through 6to4 TunnelIPb6 Fixed LAN Setup IPv6 Fixed WAN SetupFixed Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips Troubleshoot with the LEDs Power LED Is Off or BlinkingLEDs Never Turn Off Internet LED Is OffWireless 2.4 GHz and 5 GHz LEDs Are Off Cannot Access the InternetCannot Log In to the Router Troubleshooting 105 Changes Not Saved Wireless ConnectivityIncorrect Date or Time Wireless Signal Strength Supplemental Information Factory default settings Factory SettingsWPA2-PSK AES Technical SpecificationsSupplemental Information 111