2.Connect the extender to an existing WiFi network.
3.Plug the Ethernet cable from an
Install the Extender as an Access Point
You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection.
1.Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2.Plug the extender into an electrical outlet.
The Power LED 
lights green within one minute. If the Power LED does not light, press the Power button.
3.Use a WiFi network manager on a computer or WiFi device to find and connect to the NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established,
the Client Link LED 
lights.
4.Open a web browser window from the same computer or WiFi device.
The browser takes you directly to the NETGEAR genie Smart Setup. If you are not automatically directed to NETGEAR genie, launch a web browser and type www.mywifiext.net in the address field.
14