4.Connect your WiFi devices to the new extender network.
Use the same WiFi password that you use for your WiFi router.
5.Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router network.
6.Plug the extender into an electrical outlet.
The Power LED 
lights green within one minute. If the Power LED does not light, press the Power button.
7.Use the Router Link LED 
to help you choose a spot where the
Connect with Web Browser Setup
1.Use a WiFi network manager on a computer or WiFi device to find and connect to the NETGEAR_EXT (SSID) WiFi network.
After the connection with the computer or WiFi device is established,
the Client Link LED 
lights.
2.Open a web browser window from the same computer or WiFi device.
The browser takes you directly to the NETGEAR genie Smart Setup. If you are not automatically directed to NETGEAR genie, launch a web browser and type www.mywifiext.net in the address field.
8