Install the WiFi Extender
Place the extender, apply power, and connect it to your WiFi network.
Place the Extender and Apply Power
1.Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2.Plug the extender into an electrical outlet.
The Power LED 
lights green within one minute. If the Power LED does not light, press the Power button.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender to your existing WiFi network. You can do this in one of two ways:
•Connect with WPS. For more information, see Connect with WPS on page 7.
•Connect with web browser setup. For more information, see Connect with Web Browser Setup on page 8.
6