NETGEAR Official Manual for WN3000RPv3: Login and MAC Address Setup Instructions

Page 19

A login screen displays.

b.Enter admin for the user name and password for the password.

5.Select Maintenance > Network Devices.

The Network Devices screen displays the MAC addresses and virtual MAC addresses for computers and devices that are connected to the extender network.

6.On the router, add all of the virtual addresses from your extender to your router’s MAC filter table.

7.Enable the router’s MAC filter, wireless access control, or ACL.

19

Image 19 NETGEAR WN3000RPv3 manual Enter admin for the user name and password for the password
Contents Installation Getting Started WiFi Range ExtenderMeet Your Extender Side and Bottom Panels LED Descriptions Place the Extender and Apply Power Install the WiFi ExtenderConnect with WPS Connect with Web Browser Setup Netgear genie screen displays Repeat this step for all of your computers and WiFi devices Page Find the Best Location Connect an Ethernet-Enabled Device Install the Extender as an Access Point Page Frequently Asked Questions Log In to Access Extender SettingsPage Page Enter admin for the user name and password for the password Technical Support