NETGEAR Wireless ADSL Modem Router manual Modem router

Wireless ADSL Modem Router Setup Manual

1.Install ADSL filters on the phone lines.

2.Connect the router to the ADSL line.

3.Log in to the router.

4.Connect to the Internet.

Follow the steps below to connect your router to your network. Before you begin, locate the ADSL configuration information from your Internet Service Provider (ISP).

1.Connect the ADSL filter.

Note: If you purchased the DG834G in a country where an ADSL filter is not included, you must acquire one.

a.You need to install an ADSL filter for every telephone that uses the same phone line as your wireless ADSL modem router. Select the filter that came with your wireless ADSL modem router.

1

0HONE

2

3
!$3,	,INE
0HONE

1.One-Line Filter: Use with a phone or fax machine.

2.Splitter: Use with a one-line filter to share an outlet with a phone and the wireless ADSL

modem router.

3. Two-Line Filter with Splitter: Use to share an outlet with a phone and the wireless ADSL modem router.

Figure 1-5

Connecting the Router to the Internet 1-7

v1.1, 2006-2