RP614v4 Cable/DSL Router Reference Manual
If you are willing to risk open access, the WAN Setup menu shown below lets you configure a Default DMZ Server.
Figure
To assign a computer or server to be a Default DMZ server, follow these steps:
1.Click the WAN Setup link on the Advanced section of the main menu.
2.Check the Default DMZ Server box and type the IP address for that server. To remove the default DMZ server, uncheck the Default DMZ Server box.
3.Click Apply.
Disabling the SPI Firewall
The SPI (Stateful Packet Inpection) Firewall protects your LAN against Denial of Service attacks. This should only be disabled in special circumstances.
Responding to Ping on the Internet WAN Port
If you want the router to respond to a 'ping' from the Internet, click the ‘Respond to Ping on Internet WAN Port’ check box. This should only be used as a diagnostic tool, since it allows your router to be discovered. Do not check this box unless you have a specific reason to do so.
Advanced Configuration of the Router |