NETGEAR manual ME101 802.11b Wireless Ethernet Bridge Status Settings

Page 17

ME101 802.11b Wireless Ethernet Bridge Status Settings

In the Configuration Utility and in the browser-based configuration software, you can get certain status information about your bridge and your wireless network.

The Status tab of the Configuration Utility shows:

•The network SSID and the wireless router’s or access point’s media access control (MAC) address

•The type of network

•The channel and frequency of the bridge

•The type of encryption currently active

•The bridge’s IP address

•Transmitted and received data amounts

•A signal strength indicator

The Stations tab lists all active wireless access points and routers within range of the bridge.

15

Image 17

Contents Page Table of Contents Introduction Package ContentsPlacement and Range Guidelines Preparing to Install the ME101Operating Mode System RequirementsIP address ME101 Default Wireless Configuration SettingsRoom Installing the ME101Turn off the gaming console or other Ethernet-enabled device Configuring Your ME101 Click Install Utility Installing the Configuration UtilityConfiguring the Bridge for Your Wireless Network Upgrading the Bridge Changing the Password for the BridgeEnabling WEP Security on the Bridge Type http//192.168.0.200 as the Web address and press Return Using the Browser-based Configuration SoftwareChanging the password Configuring the bridge settingsSelect an Encryption Length to enable WEP security Changing the Security SettingsRestoring the Bridge to the Default Settings ME101 802.11b Wireless Ethernet Bridge Lights and SettingsME101 802.11b Wireless Ethernet Bridge Lights ME101 802.11b Wireless Ethernet Bridge Status Settings Page Symptom Cause Solution Troubleshooting TipsSystem Requirements for the Bridge Bridge SpecificationsEnvironmental Specifications CE-Konformitätserklärung CE Declaration of ConformityDéclaration de conformité CE Statement of Conditions Support Information Technical Support

Related manuals

Manual 2 pages 11.44 Kb