NETGEAR ME101 manual Turn off the gaming console or other Ethernet-enabled device

Page 7

4.Turn off the gaming console or other Ethernet-enabled device.

ME101 Wireless
Ethernet Bridge	Gaming console or other
	Ethernet-enabled device

5Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming console or other Ethernet-enabled device.

Note: The ME101 Wireless Bridge should be connected to one device only. Don’t connect it through a network switch or hub.

6.Connect the power adapter to the wireless bridge and plug the power adapter in to a

power outlet. The Power and Wireless LAN lights should light up.

7. After you see the Wireless LAN light	light up, turn on the gaming console or other
Ethernet-enabled device.

If the bridge and the Ethernet-enabled device are successfully connected, the Network

light will light up. This light flashes when there is network activity.

Note: If your setup works with the default settings, you don’t need to install the software from the provided CD to configure the bridge unless you need to change the Country/Region setting from the default setting (U.S.A.).

5

Image 7

Contents Page Table of Contents Introduction Package ContentsSystem Requirements Preparing to Install the ME101Placement and Range Guidelines Operating ModeIP address ME101 Default Wireless Configuration SettingsRoom Installing the ME101Turn off the gaming console or other Ethernet-enabled device Configuring Your ME101 Click Install Utility Installing the Configuration UtilityConfiguring the Bridge for Your Wireless Network Upgrading the Bridge Changing the Password for the BridgeEnabling WEP Security on the Bridge Type http//192.168.0.200 as the Web address and press Return Using the Browser-based Configuration SoftwareChanging the password Configuring the bridge settingsSelect an Encryption Length to enable WEP security Changing the Security SettingsME101 802.11b Wireless Ethernet Bridge Lights ME101 802.11b Wireless Ethernet Bridge Lights and SettingsRestoring the Bridge to the Default Settings ME101 802.11b Wireless Ethernet Bridge Status Settings Page Symptom Cause Solution Troubleshooting TipsEnvironmental Specifications Bridge SpecificationsSystem Requirements for the Bridge Déclaration de conformité CE CE Declaration of ConformityCE-Konformitätserklärung Statement of Conditions Support Information Technical Support

Related manuals

Manual 2 pages 11.44 Kb