NETGEAR ME101 manual Configuring the bridge settings, Changing the password

Page 14

Configuring the bridge settings:

1.Type http:// and the IP address of the bridge (the default is 192.168.0.200) as the Web address in the browser and press Return.

You’ll see the Information page.

2.To change the SSID for the bridge to connect to, click Wireless Settings.

3.Type admin as the User ID and type password as the Password.

4.Click OK.

5.Type the SSID of the wireless router or access point.

6.If you’re not in the United States, select the correct country or region from the Country/Region list. Click Yes to accept the new country or region.

Warning: Having the bridge set to the wrong country or region may result in the violation of local laws.

7.Click Apply.

8.If you’re through making changes, click Logout.

9.To use the bridge with a different Ethernet-enabled device, see Installing the ME101 on page 4 to connect the bridge.

Changing the password:

1. Start your browser software.

2. Type http:// followed by the IP address for the bridge (the default is 192.168.0.200) as the Web address and press Return.

You’ll see the Information page.

3. To change the password, click Change Password.

4. Type admin as the User ID and type the current password (password is the default) as the Password.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Table of Contents Package Contents IntroductionOperating Mode Preparing to Install the ME101Placement and Range Guidelines System RequirementsME101 Default Wireless Configuration Settings IP addressInstalling the ME101 RoomTurn off the gaming console or other Ethernet-enabled device Configuring Your ME101 Installing the Configuration Utility Click Install UtilityConfiguring the Bridge for Your Wireless Network Changing the Password for the Bridge Upgrading the BridgeEnabling WEP Security on the Bridge Using the Browser-based Configuration Software Type http//192.168.0.200 as the Web address and press ReturnConfiguring the bridge settings Changing the passwordChanging the Security Settings Select an Encryption Length to enable WEP securityRestoring the Bridge to the Default Settings ME101 802.11b Wireless Ethernet Bridge Lights and SettingsME101 802.11b Wireless Ethernet Bridge Lights ME101 802.11b Wireless Ethernet Bridge Status Settings Page Troubleshooting Tips Symptom Cause SolutionSystem Requirements for the Bridge Bridge SpecificationsEnvironmental Specifications CE-Konformitätserklärung CE Declaration of ConformityDéclaration de conformité CE Statement of Conditions Technical Support Support Information
Related manuals
Manual 2 pages 11.44 Kb
Top Page Image Contents