NETGEAR R6300 user manual IPv6 PPPoE,  To set up a PPPoE IPv6 Internet connection

Page 113

R6300v2 Smart WiFi Router

of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.

•Router’s IPv6 Address on LAN. This field shows the IPv6 address that is acquired for the router’s LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available.

3.(Optional) In the DHCP User Class (If Required) field, enter a host name.

Most people do not need to fill in this field, but if your ISP has given you a specific host name, enter it here.

4.(Optional) In the Domain Name (If Required) field, enter a domain name.

You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the IPv4 ISP here.) For example, if your ISP’s mail server is mail.xxx.yyy.zzz, you would type xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. (For example, Earthlink Cable might require a host name of home, and Comcast sometimes supplies a domain name.)

5.Specify how the router assigns IPv6 addresses to the devices on your home network (the LAN) by selecting one of the following radio buttons:

•Use DHCP Server. This method passes more information to LAN devices, but some IPv6 systems might not support the DHCv6 client function.

•Auto Config. This is the default setting.

6.(Optional) Select the Use This Interface ID check box, and specify the interface ID that you want to be used for the IPv6 address of the router’s LAN interface.

If you do not specify an ID here, the router generates one automatically from its MAC address.

7.Click the Apply button.

IPv6 PPPoE

To set up a PPPoE IPv6 Internet connection:

1.Select ADVANCED > Advanced Setup > IPv6. The IPv6 screen displays.

2.In the Internet Connection Type list, select PPPoE.

Advanced Settings

113

Image 113

Contents September 2013 East Plumeria Drive San Jose, CA R6300v2 Smart WiFi RouterSupport Contents USB Storage Administration Appendix a Supplemental Information Getting to know your router Hardware SetupUnpack Your Router Hardware FeaturesFront and Side Panels WiFi On/Off button WPS button USB 2.0 port LEDsLabel Rear PanelPosition Your Router Getting Started Connecting to the routerLogin and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for Dhcp To use Netgear genie to set up your router Netgear genie Setup To upgrade the firmware Use Netgear genie after InstallationUpgrade the Firmware Basic Home screen with dashboard, language, and online help Dashboard Basic Home ScreenWi-Fi Protected Setup Method Join Your Wireless Network To use WPS to join the wireless network Manual MethodGenie mobile app home screen Getting Started Netgear genie App and Mobile genie AppYour Internet connection and WiFi network Netgear genie Basic SettingsInternet Setup Internet IP Address Internet Setup Screen FieldsInternet Service Provider. PPPoE or PPPoA Parental Controls  To set up Live Parental ControlsR6300v2 Smart WiFi Router Click the Take me to the status screen button Basic Wireless SettingsR6300v2 Smart WiFi Router Wireless Security Options Wireless Settings Screen Fields To change the WPA settings Select Basic Wireless Settings Set Up a Guest Network To set up a guest network Select Basic Guest Network  To go to the Attached Devices screen View Attached DevicesNetgear genie Advanced Home Specifying custom settingsNetgear genie Advanced Home Screen Internet Connection Setup Wizard To use the Setup Wizard Select Advanced Setup Wizard WAN Setup Default DMZ Server Common MTU sizes Change the MTU Size To change the MTU size Select Advanced Setup WAN Setup LAN Setup To change the LAN settings Select Advanced Setup LAN Setup LAN Setup Screen SettingsUse Router as Dhcp Server Role of the Router as a Dhcp ServerSet Up Address Reservation WPS Wizard for WiFi ConnectionsPush Button Quality of Service QoS SetupWMM QoS for Wireless Multimedia Applications  To disable WMM QoS Select Advanced Setup QoS Setup Set Up QoS for Internet AccessR6300v2 Smart WiFi Router Click the Add Priority Rule button QoS for a Router LAN PortEdit or Delete an Existing QoS Policy  To edit or delete a QoS policy Select Advanced QoS SetupDevice USB Storage To connect a USB storage device USB Drive RequirementsConnect a USB Storage Device to the Router  To map the USB device to a Windows network drive Access the USB Storage DeviceSafely Remove a USB Drive  To access the USB drive with FTP from a remote computer  To access the USB drive from a remote computerShare Photos Share FilesStore Files in a Central Location for Printing  To share files with your friends and familyShare Large Files over the Internet View a USB Device Attached to the Router Network Neighborhood/MacShare. Enabled by default USB Storage Device Network and Access Settings To add a network folder Select Advanced ReadySHARE Available Network Folders To edit a network folder Select Advanced ReadySHARE Click Create Network FolderSelect the Allow only approved devices check box Specify Approved USB DevicesMedia Server Settings  To play videos On the TiVo, select TiVo Central My Shows TiVo SupportUse ReadyDLNA to Play Media from Your Network on TiVo  To copy TiVo Files onto a computer ReadySHARE Printer Setting up and managing a shared USB printerReadySHARE Printer Utility Set Up the ReadySHARE Printer Utility To set up ReadySHARE Printer  To install the Netgear USB Control Center Install the Netgear USB Control CenterR6300v2 Smart WiFi Router  To set up the Netgear USB Control Center Set Up the Netgear USB Control Center To configure the Netgear USB Control Center Configure the Netgear USB Control CenterManage USB Print and Scan Jobs Select Tools ConfigurationR6300v2 Smart WiFi Router  To launch the Netgear USB Control Center Launch the Netgear USB Control Center To use the scan feature of a multifunction USB printer Use the Scan Feature of a Multifunction USB PrinterSecurity Customizing the firewall settings To delete a keyword or domain Keyword Blocking of Http TrafficClick Delete Keyword  To specify a trusted computerBlock Services Port Filtering Port Triggering to Open Incoming Ports Port Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers Click the Add Custom Service button Add a Custom ServiceClick Edit Service or Delete Service Set Up Port TriggeringEdit or Delete a Port Forwarding Entry Application Example Make a Local Web Server PublicClear the Disable Port Triggering check box R6300v2 Smart WiFi Router  To schedule blocking Select Advanced Security Schedule Schedule BlockingSet Up Security Event Email Notifications Managing your network AdministrationUpgrade the Router Firmware Router Information View Router StatusInternet Port LAN PortShow Statistics Button Connection Status Button Wireless Settings 2.4 GHz and 5 GHz To view logs Select Advanced Administration Logs View Logs of Web Access or Attempted Web AccessBack Up Settings Manage the Configuration FileRestore Configuration Settings Do not interrupt the reboot processErase the Current Configuration Settings Change the Password To recover your password Password RecoverySetting up unique situations Advanced SettingsControl the Wireless Radio Advanced Wireless Settings To configure and enable the wireless schedule Set Up a Wireless ScheduleView or Change WPS Settings Set Up a Wireless Access List by MAC Address  To set up the router as an AP Wireless Access Point APSelect the Turn Access Control On check box Select Advanced Wireless AP  To set up bridge mode Set Up the Router in Bridge ModeClick the setup bridge mode wireless settings button Wireless repeating scenario Wireless Distribution System WDS To set up the base station Set Up the Base Station To configure the router as a repeater Set Up a RepeaterDynamic DNS Static Routes Select the Use a Dynamic DNS Service check box To edit or delete a static route Remote Management  To turn on Universal Plug and Play Universal Plug and PlayIPv6 Auto Detect Requirements for Entering IPv6 AddressesIPv6 Auto Config IPv6 6to4 Tunnel 110  To set up a fixed IPv6 Internet connection  To set up a pass-through IPv6 Internet connectionIPv6 Pass Through IPv6 FixedIPv6 Dhcp  To set up an IPv6 Internet connection with a Dhcp serverIPv6 PPPoE  To set up a PPPoE IPv6 Internet connection114 Traffic Meter 116 Troubleshooting Network Settings Wireless SettingsQuick Tips Troubleshoot with the LEDsPower LED Stays Amber Power LED Is Off or BlinkingLEDs Never Turn Off Internet LEDs Is OffCannot Log In to the Router WiFi LED Is OffCannot Access the Internet 122 Troubleshoot Internet Browsing Troubleshoot PPPoEChanges Not Saved Wireless Connectivity To ping the router from a Windows computer Troubleshoot Your Network Using the Ping UtilityTest the LAN Path to Your Router Test the Path from Your Computer to a Remote Device Supplemental Information Factory default settings Factory Settings129 R6300v2 Router specifications Technical SpecificationsNotification of Compliance Netgear Dual Band WirelessIndustry Canada Avertissement

Related manuals

Manual 18 pages 55.62 Kb