Anritsu MS2036C, MS2026C, MS2038C, MS2028C manual Channel Scanner Option 0027 Models MS2036/38C only

High Accuracy Power Meter (Option 0019) Requires external USB power sensor.

Conduct precise measurements of CW and digitally modulated transmitters in the field using this VNA Master software mode with a separately purchased Anritsu USB power sensor. After specifying the center frequency and zeroing the sensor to ensure accuracy at low power levels, the software offers intuitive operation for absolute and relative readouts in dBm or Watts. Option 0019 supports the USB Power Sensors in the following table.

USB Power Sensors (Ordered separately):

	PSN50	MA24104A	MA24106A	MA24108A	MA24118A
Frequency Range	50 MHz to 6 GHz	600 MHz to 4 GHz	50 MHz to 6 GHz	10 MHz to 8 GHz	10 MHz to 18 GHz
Description	High Accuracy	Inline	High Accuracy	Microwave	Microwave
	RF Power Sensor	High Power Sensor	RF Power Sensor	USB Power Sensor	USB Power Sensor
Connector	Type N, male, 50 Ω	Type N, female, Ω	Type N, male, 50 Ω	Type N, male, 50 Ω	Type N, male, 50 Ω
Dynamic Range	–30 dBm to +20 dBm	+3 dBm to +51.76 dBm	–40 dBm to +23 dBm	–40 dBm to +20 dBm	–40 dBm to +20 dBm
	(0.001 mW to 100 mW)	(2 mW to 150 W)	(0.1 µW to 200 mW)	(0.1 µW to 100 mW)	(0.1 µW to 100 mW)
VBW	100 Hz	100 Hz	100 Hz	50 kHz	50 kHz
Measurement	True-RMS	True-RMS	True-RMS	True-RMS. Slot Power,	True-RMS, Slot power,
				Burst Average Power	Burst Average power
Measurement Uncertainty	±0.16 dB1	±0.17 dB2	±0.16 dB1	±0.18 dB3	±0.18 dB3
Datasheet for Additional	11410-00414	11410-00483	11410-00424	11410-00504	11410-00504
Specifications
Notes:

1)Total RSS measurement uncertainty (0 ºC to 50 ºC) for power measurements of a CW signal greater than –20 dBm with zero mismatch errors

2)Expanded uncertainty with K=2 for power measurements of a CW signal greater than +20 dBm with a matched load. Measurement results referenced to the input side of the sensor.

3)Expanded uncertainty with K=2 for power measurements of a CW signal greater than –20 dBm with zero mismatch errors

Interference Analyzer (Option 0025) (Models MS2036/38C only) (Recommend GPS)

	Spectrum
	Field Strength
	Occupied Bandwidth
	Channel Power
	Adjacent Channel Power (ACPR)
	AM/FM/SSB Demodulation (Wide/Narrow FM, Upper/Lower SSB), (audio out only)
	Carrier-to-Interference ratio (C/I)
	Spectrogram (Collect data up to one week)
Measurements	Signal Strength (Gives visual and aural indication of signal strength)
	Received Signal Strength Indicator (RSSI) (collect data up to one week)
	Gives visual and aural indication of signal strength
	Signal ID (up to 12 signals)
	Center Frequency
	Bandwidth
	Signal Type (FM, GSM, W-CDMA, CDMA, Wi-Fi)
	Closest Channel Number
	Number of Carriers
	Signal-to-Nose Ratio (SNR) > 10 dB
Application Options	Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

Channel Scanner (Option 0027) (Models MS2036/38C only)

Number of Channels	1 to 20 Channels (Power Levels)
Measurements	Graph/Table, Max Hold (On/5 sec/Off), Frequency/Channel, Current/Maximum, Dual Color
Scanner	Scan Channels, Scan Frequencies, Scan Customer List, Scan Script Master™
Amplitude	Reference Level, Scale
Custom Scan	Signal Standard, Channel, # of Channels, Channel Step Size, Custom Scan
Frequency Range	150 kHz to 13 GHz
Frequency Accuracy	± 10 Hz + Time base error
Measurement Range	–110 dBm to +30 dBm
Application Options	Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other)

)

15