To return your AirPort Extreme to the factory settings:
mUse the tip of a ballpoint pen to press and hold down the reset button until the status light flashes quickly (about 5 seconds).
The AirPort Extreme resets with the following settings:
ÂThe AirPort Extreme receives its IP address using DHCP.
ÂThe network name reverts to Apple Network XXXXXX (where XXXXXX is replaced with the last six digits of the AirPort ID).
ÂThe base station password returns to public.
If your base station is still not responding, try the following:
1Unplug your AirPort Extreme.
2Use the tip of a ballpoint pen to hold down the reset button while you plug in your AirPort Extreme.
If Your AirPort Extreme Status Light Flashes Amber
The Ethernet cable may not be connected properly, your AirPort Extreme may be out of range of an AirPort network, or there may be a problem with your Internet service provider. If you are connected to the Internet with a DSL or cable modem, the modem may have lost its connection to the network or the Internet. Even if the modem seems to be working properly, try disconnecting the modem from its power supply, waiting a few seconds, and then reconnecting it. Make sure your AirPort Extreme is connected directly to the modem with an Ethernet cable before reconnecting power to the modem.
Chapter 4 Tips and Troubleshooting
29