D-Link DIR-615 manual L2TP

Page 28

Section 3 - Configuration

L2TP

Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username and password. This option is typically used for DSL services.

Address Mode: Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic.

L2TP IP Address: Enter the L2TP IP address supplied by your

ISP (Static only).

L2TP Subnet Mask: Enter the Subnet Mask supplied by your ISP (Static only).

L2TP Gateway: Enter the Gateway IP Address provided by your ISP.

L2TP Server IP: Enter the Server IP provided by your ISP (optional).

Username: Enter your L2TP username.

Password: Enter your L2TP password and then retype the password in the next box.

Reconnect Mode: Select either Always-on, On-Demand, or

Manual.

Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect.

DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).

D-Link DIR-615 User Manual

24

Image 28

Contents Page Preface Manual RevisionsTrademarks Date DescriptionTable of Contents Wireless Security WarrantyNetworking Basics RegistrationProductPackageOverviewContents CD Installation Wizard System RequirementsComputer with the following Browser RequirementsFeatures Hardware Overview ConnectionsPower LED LEDsInternet LED Local Network LEDsInstallation Before you BeginWireless Installation Considerations Network Diagram Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Getting Started Configuration Web-based Configuration UtilityInternet Connection Setup Wizard Configuration Configuration Configuration Configuration Dynamic Cable Manual ConfigurationInternet Connection is drop-down menu My Internet Connection Host Name Dynamic IP Address DhcpMAC Address PPPoE DSL My Internet Select PPPoE Username/Password fromManual Username Password Address ModePptp Subnet Mask Pptp Gateway Page L2TP Page Static IP Address Wireless Settings Manual Wireless Network Setup Page Network Settings Dhcp Server Settings Number Dhcp ReservationClients Page Virtual Server Configuration Port Forwarding Application Rules QoS Engine SpeedNetwork Filters Access Control Access Control WizardAccess Control Wizard Access Control Wizard Website Filters Website URL DomainInbound Filters Enable SPI NAT Endpoint Filtering Firewall SettingsIP Address Advanced Wireless Settings Transmit Power Set the transmit power of the antennasUPnP Settings Advanced Network SettingsMulticast Streams IPv6 Link-Local Connectivity Autoconfiguration Type Select Stateful DHCPv6 or Stateless Static IPv6 StatefulStatic IPv6 Stateless Lifetime minutesDHCPv6 Stateful DHCPv6 Stateless IPv6 over PPPoE Stateful AddressCheck to enable the Autoconfiguration feature IPv6 over PPPoE Stateless Lifetime To 4 Tunneling Stateful Autoconfiguration featureAddress Address To 4 Tunneling Stateless IPv6 in IPv4 Tunneling Stateful IPv6 in IPv4 Tunneling Stateless Administrator Settings Time Settings SysLog SysLog Server SysLog ServerMail Settings Authentication authenticationSystem Settings Update Firmware Check Email Notification of Newer FirmwareDdns System Check Schedules Device Information Igmp Multicast Log Stats Internet Sessions Page Wireless Support Wireless Security What is WPA?Wireless Connection Setup Wizard Security Security Add Wireless Device with WPS Wizard Configure WPA-Personal PSK Configure WPA-Enterprise Radius Added overheadSecurity Connect to a Wireless Network Using Windows VistaConfigure WPA/WPA2 Connecting to a Wireless Network Connect Using WCN Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility?What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network WlanHome Wireless Personal Area Network WpanSmall Office and Home Office Centralize your router or Access Point Eliminate InterferenceWireless Modes SecurityNetworking Basics Check your IP addressStatically Assign an IP address StepTechnical Specifications Contacting Technical Support For customers within the United StatesWarranty Limited WarrantyNon-Applicability of Warranty Limited Software WarrantySubmitting a Claim What Is Not Covered Disclaimer of Other WarrantiesLimitation of Liability Governing LawTrademarks Copyright StatementCE Mark Warning FCC StatementFCC Caution FCC Radiation Exposure StatementIC Radiation Exposure Statement IC statementRèglement d’Industry Canada Registration

Related manuals

Manual 34 pages 36.27 Kb