Section 3 - Configuration
IPv6 in IPv4 Tunneling (Stateless)
My IPv6 Connection: Select IPv6 in IPv4Tunnel from the
IPv6 in IPv4 Tunnel Enter the settings supplied by your Internet
Settings: provider (ISP).
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN
Address: Address.
Enable Check to enable the Autoconfiguration
Autoconfiguration: feature.
Autoconfiguration Type: Select Stateful (DHCPv6) or Stateless. Refer to the next page for Stateless.
IPv6 Address Range Enter the start IPv6 Address for the DHCPv6
Start: range for your local computers.
IPv6 Address Range Enter the end IPv6 Address for the DHCPv6
End: range for your local computers.
IPv6 Address Lifetime: Enter the IPv6 Address Lifetime (in minutes).
61 |