Section 4 - Security
Configure WPA-Enterprise (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.Log into the
2.Next to Security Mode, select WPA-Enterprise.
3.Next to WPA Mode, select Auto, WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2.
4.Next to Cypher Type, select TKIP and AES, TKIP, or AES. If you have wireless clients that use both types, use TKIP and AES.
5.Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default).
6.Next to Authentication Timeout, enter the amount of time before a client is required to
7.Next to RADIUS Server IP Address enter the IP Address of your RADIUS server.
8.Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port.
9.Next to RADIUS Server Shared Secret, enter the security key.
85 |