Section 3 - Configuration
Internet Setup
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services.
L2TP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses.
IP Address: Enter the IP address (Static L2TP only).
Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only).
Gateway: Enter the Gateway IP Address provided by your ISP.
DNS: The DNS server information will be supplied by your ISP (Internet Service Provider.)
Server IP: Enter the Server IP provided by your ISP (optional).
L2TP Account: Enter your L2TP account name.
L2TP Password: Enter your L2TP password and then retype the password in the next box.
Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this
feature, enable
MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU.
Connect Mode:
Select either
22 |