D-Link DIR-301 manual Firewall Settings

Page 32

Section 3 - Configuration

Firewall Settings

This section will allow you to setup a DMZ host and to enable VPN passthrough.

If you have a client PC that cannot run Internet applications properly from behind the DIR-301, then you can set the client up for unrestricted Internet access. It allows a computer to be exposed to the Internet. This feature is useful for gaming purposes. Enter the IP address of the internal computer that will be the DMZ host. Adding a client to the DMZ (Demilitarized Zone) may expose your local network to a variety of security risks, so only use this option as a last resort.

Enable DMZ Host: Check this box to enable DMZ.

DMZ IP Address: Enter the IP address of the computer you would like to open all ports to.

Enable PPTP Check this box to allow PPTP VPN traffic to

Passthrough: pass through the router to your VPN client.

Enable L2TP Check this box to allow L2TP VPN traffic to pass

Passthrough: through the router to your VPN client.

Enable IPSec Check this box to allow IPSec VPN traffic to

Passthrough: pass through the router to your VPN client.

D-Link DIR-301 User Manual

32

Image 32
Contents Page Table of Contents Wireless Security Troubleshooting Wireless BasicsNetworking Basics RegistrationProductPackageOverviewContents Introduction Features LAN Ports Hardware OverviewConnections Power LED LEDsLocal Network LEDs Status LEDInstallation Before you BeginWireless Installation Considerations Connect to Cable/DSL/Satellite Modem Connect to Another Router Installation Configuration Web-based Configuration UtilitySetup Wizard Click Launch Internet Connection Setup Wizard to beginConfiguration Configuration Configuration Internet Setup Dynamic CablePPPoE DSL Pptp L2TP Big Pond Static assigned by ISP Wireless Settings Network Settings Dhcp Server Settings Port Forwarding Rules Application Rules Network Filter Dhcp ClientConfigure Website Select Turn Website Filtering OFF, Turn Website FilterFirewall Settings Advanced Wireless Settings CTS ModeAdvanced Network Settings Administrator Settings IP Address PortTime Settings System Settings Firmware Upgrade System Check Device Information Log Wireless Stats StatsSupport Wireless Security What is WEP?Configure WEP Next to Security Mode, select Enable WEP SecurityWhat is WPA? Configure WPA-PSK Configure WPA Radius Connect to a Wireless Network Using Windows XPConfigure WEP Connecting to a Wireless Network Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility?What can I do if I forgot my password? Troubleshooting Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network WlanSmall Office and Home Office Wireless Personal Area Network WpanHome Centralize your router or Access Point Eliminate InterferenceWireless Modes SecurityNetworking Basics Check your IP addressStep Step Highlight Internet Protocol TCP/IP and click PropertiesTechnical Specifications StandardsHumidity Contacting Technical Support