Section 3 - Configuration
Internet Setup
Static (assigned by ISP)
Select Static IP Address if all WAN IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
IP Address: Enter the IP address assigned by your ISP.
Subnet Mask: Enter the Subnet Mask assigned by your ISP.
ISP Gateway: Enter the Gateway assigned by your ISP.
MAC Address: The default MAC Address is set to the WAN’s |
|
physical interface MAC address on the Broadband |
|
Router. It is not recommended that you change |
|
the default MAC address unless required by your |
|
ISP. |
|
Clone MAC The default MAC address is set to the WAN’s |
|
Address: physical interface MAC address on the Broadband |
|
Router. You can use the Clone MAC Address |
|
button to copy the MAC address of the Ethernet |
|
Card installed by your ISP and replace the WAN |
|
MAC address with the MAC address of the router. |
|
It is not recommended that you change the default |
|
MAC address unless required by your ISP. |
|
Primary DNS Enter the Primary DNS server IP address assigned |
|
Address: by your ISP. |
|
Secondary DNS This is optional. |
|
Address: |
|
MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 |
|
is the default MTU. |
|
24 |