Using the Configuration Menu | |
|
|
Static Routing
Static Routing
Static Routing:
Network Address:
Netmask:
Gateway:
Interface:
Metric:
Advanced > Static Routing
If there is more than one router on a network, this Routing table must be configured because the router needs to know what packet goes to which router. A routing table entry is required for each LAN segment on the network.
Network Address is the address of the destination network segment.
The subnet mask used to select the bits from an IP Address that corresponds to the subnet.
The IP router that the packets destined to the Network Address will be forwarded to.
The device’s port that the packets destined to the Network Address will be passed through.
The number of routers that must be traversed to reach the destination network segment.
22 |