Using the Configuration Menu | |
|
|
NAT
Advanced > Nat
NAT Configuration:
NAT Routing:
TCP Timeout:
UDP Timeout:
TCP Window Limit:
TCP MSS Limit:
To enable or disable NAT routing by checking or unchecking the checkbox. If you disable NAT routing, this device will act as a Bridge or Static Router. Most features, including Load Balance, will be unavailable. If some packets whose port number cannot be translated for special applications, you must input value in port range for Disable Port Translation.
During the time that TCP expects to receive the acknowledgement from the destination.
During the time that UDP expects to receive the acknowledgement from the destination.
The maxmimum number of outstanding packets before TCP receiving an acknowledgement.
The largest amount of data that can be transmitted in one TCP packet.
30 |