D-Link DI-LB604 manual How do I open ports on my router?, To set up your router

Page 66

DI-LB604 User’s Manual	Frequently Asked Questions

4 Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus?

In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact AOL if you are not sure.

To set up your router:

Step 1: Log into the web-based conﬁguration (192.168.0.1) and conﬁgure the WAN side to use PPPoE.

Step 2: Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box.

Step 3: You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400.

Step 4: Apply settings.

Step 5: Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1 to 2 minutes to connect.

If you connect to the Internet with a different internet service provider and want to use the AOL software, you can do that without conﬁguring the router’s ﬁrewall settings.You need to conﬁgure the AOL software to connect using TCP/IP.

Go to http://www.aol.com for more speciﬁc conﬁguration information of their software.

5 How do I open ports on my router?

To allow trafﬁc from the internet to enter your local network, you will need to open up ports or the router will block the request.

Step 1: Open your web browser and enter the IP Address of your D-Link router (192.168.0.1). Enter username (admin) and your password (blank by default).

Step 2: Click on Advanced on top and then click Virtual Server on the left side.

D-Link Systems, Inc.

66

Image 66

Contents Page Table of Contents Stats DI-LB604 User’s ManualUPnP Misc Status Device Info Log Securing Your Network GlossaryPackage Contents Minimum System RequirementsIntroduction Features and Beneﬁts Hardware Overview ConnectionsLEDs Getting Started Using the Conﬁguration Menu Wizard Home WizardConnection Home WANAddress Information Pptp DialupOptional Largest amount of data that can be transferred across a Home WAN Port OptionsApply to Given physical networkPPPoE / Pptp Connection Dhcp Server LAN SettingsIP Address Subnet Mask Dhcp Server Starting IP Address Ending IP AddressDhcp Client List Help View Dhcp List Setting StaticLease Time Dhcp Client ListHome Dhcp Setting Static Dhcp Static DhcpHost Name MAC Address Reserved IP Load Balance Conﬁguration Load Balance Enable Base on Loading ShareHome Load Balance NAT StatisticsHost IP Host IPHost IP Host Network IdentityHost & Group List Host Network bindingStrict Binding Loose Binding Host & Group ListStatic Routing Static RoutingAdvanced Static Routing Virtual Server Virtual ServerAdvanced Virtual Server Applications Special ApplicationSpecial Application Conﬁguration Special Application List Multi DMZAdvanced Multi DMZ Access Filters Name PPPoE Sess Private IP LAN Access Group DirectionAccess Filters URL BlockingIcmp Filters User-deﬁned Ports To FilterQoS QoS SetupEnable QoS Queuing Method Process TOS Field Advanced QoSQoS Policy QoS Set PolicyAdvanced QoS Set Policy Policy Name Local/Remote Address Protocol TypeAdvanced Nat NAT ConﬁgurationPort Range Non-Port Translation Set NAT Alias Enable Local Lan IP Wan IP ProtocolNAT Port Options Set NAT AliasAdmin NTP Conﬁguration TimeSystem Time Zone NTP ServersUpgrade Firmware System SettingLoad Settings FirmwareGlobal Settings Notiﬁcation on Email AlertSnmp Simple Network Management Protocol Recipient Address Send Test E-mailTools Snmp Community Trap TargetsTools Ddns Additional SettingsEnable Wildcard Dynamic DNSUPnP WAN Port BindingUPnP Option External Filters Conﬁguration MiscTools Misc Ident PortInterface Binding System RestartDNS Loopback Set Protocol & Port BindingDevice Information Device InfoDevice Information Status Device InformationView Log Log SettingsLog View LogLog Priority for Modules Syslog DeliverySending Out Keep Sent Messages Syslog Servers Message StatusStats RefreshRestart Counters Interface Statistics Interface Statistics Load Share Overall StatisticsNAT Status NAT TimeoutsNAT Status Status Statistics NAT StatusTCP Property NAT Trafﬁc Connections Errors Misc NAT Connection ListStatus Statistics NAT Status View Connection List Troubleshooting Resetting the DI-LB604 to Factory Default Settings Technical Speciﬁcations Power Input WeightWarranty Frequently Asked Questions Why can’t I access the Web-based conﬁguration?How to tell straight-through cable from a crossover cable DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual  Click Specify an IP Address DI-LB604 User’s Manual  Right-click on My Network Places and select Properties  Highlight Internet Protocol TCP/IP and click PropertiesDI-LB604 User’s Manual DI-LB604 User’s Manual Static Cable Connection DI-LB604 User’s Manual DI-LB604 User’s Manual To set up your router How do I open ports on my router?Click Apply and then click Continue What is DMZ? How do I conﬁgure the DMZ Host?Demilitarized Zone DI-LB604 User’s Manual Click Apply and then click Continue How do I use PC Anywhere with my DI-LB604 router? What are virtual servers?Create a second entry as shown below Link Systems, Inc How can I use eDonkey behind my D-Link Router? Click on Advanced and then click FirewallClick Apply and then Continue How do I configure my router for KaZaA and Grokster? How do I conﬁgure my router to play Warcraft 3? Click on Advanced and then click Virtual ServerWhat is NAT? How do I use NetMeeting with my D-Link Router?Conﬁgure the Game Port information on each computer Change Admin Password Set up MAC FilteringAppendix Glossary DI-LB604 User’s Manual DI-LB604 User’s Manual DI-LB604 User’s Manual Megabyte MB Megabits per second Mbps DI-LB604 User’s Manual DI-LB604 User’s Manual Virtual LAN Link Technical Support over the Telephone 877 Contacting Technical SupportTech Support for customers within the United States Tech Support for customers within CanadaWarranty Warranty DI-LB604 User’s Manual Important Note Registration

Related manuals

Manual 92 pages 42.25 Kb