Linksys BEFSR41, BEFSRU31 manual DMZ Hosting

Page 31

Instant BroadbandSeries

To create a static route entry:

1. Select Static Route Entry from the drop-down list. The Cable/DSL Router supports up to 20 static route entries.

2. Enter the following data to create a static route:

Destination LAN IP The Destination LAN IP address is the address of the remote network or host to which you want to assign a static route. Enter the IP address of the host for which you wish to create a static route here. If you are establishing a route to an entire network, be sure that the network portion of the IP address is set to zero (0).

For example, the Router’s standard IP address is 192.168.1.1. Based on this address, the address of the network to which the Router is connected is 192.168.1, with the last digit (1, in this case) determining the Router’s place on the network. Therefore, you would enter the IP address 192.168.1.0 if you wanted to route to the Router’s entire network, rather than to just the Router.

Subnet Mask The Subnet Mask (also called the Network Mask) deter- mines which portion of an IP address is the network portion and which por- tion is the host portion. In the example above, the Network Mask is 255.255.255.0. This determines (by using the values 255) that the first three numbers of an network IP address identify this particular network, while the last digit (from 1 to 254) would identify the specific host.

Default Gateway This IP address must be the IP address of the gateway device that allows for contact between the Router and the remote network or host.

Hop Count This value gives the number of nodes that a data packet passes through before reaching its destination. A node is any device on the net- work, such as switches, PCs, etc.

Interface Interface tells you whether your network is on the LAN or the WAN, or the Internet. If you’re connecting to a sub- network, select LAN. If you’re connecting to another network through the Internet, select WAN.

3. Click the Apply button to save your changes.

EtherFast® Cable/DSL Routers

DMZ Hosting

The DMZ Hosting feature allows one local user to be exposed to the Internet for use of a special-purpose service such as Internet gaming and video-confer- encing.

Whereas IP Forwarding can only forward a maximum of 10 ranges of ports, DMZ hosting forwards all the ports for one PC simultaneously.

To expose one PC, enter the computer’s IP address and click the Apply but- ton.

Deactivate DMZ by entering a zero (0) in the field and clicking the Apply button.

55

56

Image 31
Contents EtherFast Cable/DSL Routers Copyright & Trademarks Table of Contents Linksys EtherFast Cable/DSL Router FeaturesPackage Contents for the 4-Port Router BEFSR41 One IntroductionPackage Contents for the 3-Port Router BEFSRU31 Package Contents for the 1-Port Router BEFSR11Port Router’s Front Panel LEDs LAN IndicatorsGetting to Know the 4-Port EtherFast Cable/DSL Router 4-Port Router’s Rear PanelOne-Port Router’s Rear Panel Getting to Know the 1-Port EtherFast Cable/DSL RouterOne-Port Router’s Ports Port 1-Port Router’s Front Panel LEDs WAN Indicators3-Port Router’s Rear Panel Ports Getting to Know the 3-Port EtherFast Cable/DSL Router3-Port Router’s Front Panel LEDs ButtonsLANs and WANs OverviewIP Addressing a Quick Lesson What’s an IP Address?Connecting Your Hardware Together and Booting Up Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses Technical Checkpoint Uplinking Connecting More Devices to Your RouterInstalling the Windows 98 Driver Installing the BEFSRU31’s USB Port DriversInstant Broadband Series Installing the Windows 2000 Driver Instant Broadband Series Installing the Windows Millennium Driver Installing the Windows XP Driver Configuring PCs to Connect to the Cable/DSL Router Configuring Your Network with the Cable/DSL RouterConfiguring the Cable/DSL Router Cable/DSL Router’s Web- based Utility Quick & Easy Router AdministrationSetup Status Password StatusLog DhcpSoftware Download ZoneAlarm Pro SettingsPC-cillin Settings SecurityDynamic Routing HelpIP Filtering IP Forwarding Using Remote UpgradeUsing MTU Maximum Transmission Unit Using Port TriggeringStatic Dynamic Routing Static RoutingDMZ Hosting Common Problems and Solutions TroubleshootingMAC Address Clone Can’t obtain an IP address from my cable or DSL modem When I enter a URL or IP address, I get a time out errorCan’t access my e-mail or the Internet Frequently Asked QuestionsInstant Broadband Series Glossary Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series Appendix How to Ping Your ISP’s E-mail & Web AddressesStep One Pinging an IP Address Step Two Pinging for a Web Address Installing the TCP/IP ProtocolTwisted-Pair Cabling TCP/IP Installation is now completeStraight-Through Cabling Cross-Over Cabling Port Router SpecificationsPort Environmental Specifications Crimping Your Own Network CablesBEFSR11 Copyright 2002 Linksys, All Rights Reserved Customer Support