Linksys BEFSRU31, BEFSR41 manual Instant Broadband Series

Page 36

Instant BroadbandSeries

Broadband - A data-transmission scheme in which multiple signals share the bandwidth of a medium. This allows the transmission of voice, data, and video signals over a single medium. Cable television uses broadband techniques to deliver dozens of channels over one cable.

Browser - A browser is an application program that provides a way to look at and interact with all the information on the World Wide Web or PC. The word “browser” seems to have originated prior to the Web as a generic term for user interfaces that let you browse text files online.

Cable Modem - A device that connects a computer to the cable television net- work, which in turn connects to the Internet. Once connected, cable modem users have a continuous connection to the Internet. Cable modems feature asymmetric transfer rates: around 36 Mbps downstream (from the Internet to the computer), and from 200 Kbps to 2 Mbps upstream (from the computer to the Internet).

CAT 3 - ANSI/EIA (American National Standards Institute/Electronic Industries Association) Standard 568 is one of several standards that specify “categories” (the singular is commonly referred to as “CAT”) of twisted pair cabling systems (wires, junctions, and connectors) in terms of the data rates that they can sustain. CAT 3 cable has a maximum throughput of 16 Mbps and is usually utilized for 10BaseT networks.

CAT 5 - ANSI/EIA (American National Standards Institute/Electronic Industries Association) Standard 568 is one of several standards that specify “categories” (the singular is commonly referred to as “CAT”) of twisted pair cabling systems (wires, junctions, and connectors) in terms of the data rates that they can sustain. CAT 5 cable has a maximum throughput of 100 Mbps and is usually utilized for 100BaseTX networks.

CAT 5e - The additional cabling performance parameters of return loss and far- end crosstalk (FEXT) specified for 1000BASE-T and not specified for 10BASE-T and 100BASE-TX are related to differences in the signaling imple- mentation. 10BASE-T and 100BASE-TX signaling is unidirectional—signals are transmitted in one direction on a single wire pair. In contrast, Gigabit Ethernet is bi-directional—signals are transmitted simultaneously in both directions on the same wire pair; that is, both the transmit and receive pair occupy the same wire pair.

CPU (Central Processing Unit) - The computing part of the computer. Also called the “processor,” it is made up of the control unit and ALU.

EtherFast® Cable/DSL Routers

CSMA/CD (Carrier Sense Multiple Access/Collision Detection) - The LAN access method used in Ethernet. When a device wants to gain access to the net- work, it checks to see if the network is quiet (senses the carrier). If it is not, it waits a random amount of time before retrying. If the network is quiet and two devices access the line at exactly the same time, their signals collide. When the collision is detected, they both back off and each waits a random amount of time before retrying.

Daisy Chain - Connected in series, one after the other. Transmitted signals go to the first device, then to the second, and so on.

Database - A database is a collection of data that is organized so that its con- tents can easily be accessed, managed, and updated.

Data Packet - One frame in a packet-switched message. Most data communi- cations is based on dividing the transmitted message into packets. For example, an Ethernet packet can be from 64 to 1518 bytes in length.

Default Gateway - The routing device used to forward all traffic that is not addressed to a station within the local subnet.

DHCP (Dynamic Host Configuration Protocol) - A protocol that lets network administrators centrally manage and automate the assignment of Internet Protocol (IP) addresses in an organization's network. Using the Internet’s set of protocol (TCP/IP), each machine that can connect to the Internet needs a unique IP address. When an organization sets up its computer users with a con- nection to the Internet, an IP address must be assigned to each machine. Without DHCP, the IP address must be entered manually at each computer and, if computers move to another location in another part of the network, a new IP address must be entered. DHCP lets a network administrator supervise and dis- tribute IP addresses from a central point and automatically sends a new IP address when a computer is plugged into a different place in the network.

DHCP uses the concept of a “lease” or amount of time that a given IP address will be valid for a computer. The lease time can vary depending on how long a user is likely to require the Internet connection at a particular location. It’s espe- cially useful in education and other environments where users change fre- quently. Using very short leases, DHCP can dynamically reconfigure networks in which there are more computers than there are available IP addresses.

DHCP supports static addresses for computers containing Web servers that need a permanent IP address.

65

66

Image 36
Contents EtherFast Cable/DSL Routers Copyright & Trademarks Table of Contents Features Package Contents for the 4-Port Router BEFSR41 OneIntroduction Linksys EtherFast Cable/DSL RouterPackage Contents for the 1-Port Router BEFSR11 Package Contents for the 3-Port Router BEFSRU31LAN Indicators Getting to Know the 4-Port EtherFast Cable/DSL Router4-Port Router’s Rear Panel Port Router’s Front Panel LEDsGetting to Know the 1-Port EtherFast Cable/DSL Router One-Port Router’s Rear PanelOne-Port Router’s Ports WAN Indicators Port 1-Port Router’s Front Panel LEDsGetting to Know the 3-Port EtherFast Cable/DSL Router 3-Port Router’s Rear Panel PortsButtons 3-Port Router’s Front Panel LEDsOverview IP Addressing a Quick LessonWhat’s an IP Address? LANs and WANsDhcp Dynamic Host Configuration Protocol Servers Connecting Your Hardware Together and Booting UpDynamic IP Addresses Uplinking Connecting More Devices to Your Router Technical CheckpointInstalling the BEFSRU31’s USB Port Drivers Installing the Windows 98 DriverInstant Broadband Series Installing the Windows 2000 Driver Instant Broadband Series Installing the Windows Millennium Driver Installing the Windows XP Driver Configuring Your Network with the Cable/DSL Router Configuring PCs to Connect to the Cable/DSL RouterConfiguring the Cable/DSL Router Quick & Easy Router Administration Cable/DSL Router’s Web- based UtilitySetup Password Status StatusDhcp LogZoneAlarm Pro Settings PC-cillin SettingsSecurity Software DownloadHelp Dynamic RoutingIP Filtering Using Remote Upgrade Using MTU Maximum Transmission UnitUsing Port Triggering IP ForwardingDynamic Routing Static Routing StaticDMZ Hosting Troubleshooting Common Problems and SolutionsMAC Address Clone When I enter a URL or IP address, I get a time out error Can’t access my e-mail or the InternetFrequently Asked Questions Can’t obtain an IP address from my cable or DSL modemInstant Broadband Series Glossary Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series Instant Broadband Series How to Ping Your ISP’s E-mail & Web Addresses AppendixStep One Pinging an IP Address Installing the TCP/IP Protocol Step Two Pinging for a Web AddressTCP/IP Installation is now complete Twisted-Pair CablingPort Router Specifications Port Environmental SpecificationsCrimping Your Own Network Cables Straight-Through Cabling Cross-Over CablingBEFSR11 Customer Support Copyright 2002 Linksys, All Rights Reserved