Linksys WAP54G manual Wireless, Administration, Status

Page 44

Wireless-G Access Point

Wireless

You will use the Wireless tabs to enter a variety of wireless settings for the Access Point.

•Basic Wireless Settings. Enter the network mode, SSID, and other basic settings on this screen.

•Wireless Security. Use this screen to configure the Access Point’s wireless security settings.

•Wireless MAC Filter. From this screen, you can allow or block access to your wireless network.

•Advanced Wireless Settings. Configure the Access Point’s more advanced wireless settings.

Administration

You will use the Administration tabs to manage the Access Point.

•Management. This screen allows you to customize the password settings, as well as back up or restore the Access Point’s configuration file.

•SNMP. Configure the Simple Network Management Protocol (SNMP) settings on this screen.

•Log. Configure the Log settings for the Access Point on this screen.

•Factory Defaults. Use this screen to reset the Access Point to its factory default settings.

•Firmware Upgrade. Upgrade the Access Point’s firmware on this screen.

Status

You will be able to view status information for your local and wireless network.

•Local Network. This screen will display current information on the Access Point and its local network.

•Wireless Network. This screen will display current information on the Access Point and its wireless network.

Chapter 7: Configuring the Wireless-G Access Point

snmp: the standard e-mail protocol on the Internet.

firmware: the programming code that runs a networking device.

37

Navigating the Utility

Image 44

Contents 802 GHz .11g Wireless- G How to Use this User Guide Copyright and TrademarksTable of Contents Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Front Panel Back Panel25 Congratulations Screen Site Survey Screen Introduction WelcomeWhat’s in this User Guide? Wireless-G Access Point Roaming Planning Your Wireless NetworkNetwork Topology Network Layout Getting to Know the Wireless-G Access Point Cisco logoBack Panel LAN Port Overview Connecting the Wireless-G Access PointConnections for Setup Setting up the Wireless-G Access Point Using the Setup WizardConnect the Network Cable to the Router or Switch Screen Check the Access Point’s Status Screen Password Screen Basic Settings Screen Using the Access Point’s SecureEasySetup Feature 10 SecureEasySetup Screen15 Confirm New Settings Screen Configuring a Non-SecureEasySetup Device 16 Congratulations ScreenManually Configuring the Access Point’s Wireless Settings 17 Configure Wireless Settings ScreenWEP 64-Bit WEP 128-BitWPA Personal WPA2 PersonalWPA Enterprise WPA2 Mixed ModeLinksys Wireless Guard 25 Congratulations Screen Configuring the Linksys Wireless Guard Settings 26 Attention Screen28 Securing Your Access Point Screen 31 Wireless Guard Congratulations Screen Using the Linksys Wireless Guard Service Client Software InstallationExit Other Applications Destination Location Network Access Restart Your ComputerAccessing your Account Your Account11 Network Administration Add a Guest12 Modify Access Control Add a Member Member Registration16 Subscriber Information 18 Credentials Information To secure an unprotected network Securing or Unprotecting Your Wireless Guard NetworkTo unprotect a network Navigating the Utility Configuring the Wireless-G Access PointSetup Status WirelessAdministration Accessing the Utility Setup Network Setup TabNetwork Setup Configuration TypeSetup Static IP Screen LAN MAC Address Setup AP Mode TabAP Mode Configuring the Wireless-G Access Point Setup AP Mode Tab Wireless-G Access Point Wireless Basic Wireless Settings Tab Basic Wireless Settings12 Confirm Reset Wireless Wireless Security Tab Wireless SecurityWPA-Personal WPA2-PersonalWPA2-Mixed WPA-EnterpriseRadius Access Restriction Wireless Wireless MAC Filter TabWireless MAC Filter Wireless Advanced Wireless Settings Tab Advanced WirelessWireless-G Access Point Administration Management Tab AP’s PasswordBackup and Restore ManagementSnmp Community Administration Snmp TabSnmp V1/V2c Administration Log Tab LogAdministration Factory Defaults Tab Administration Firmware Upgrade TabFirmware Upgrade Factory DefaultsLocal Network Status Local Network TabAP’s Information Status Wireless Network Tab Wireless NetworkAppendix a Troubleshooting Frequently Asked QuestionsWhat Ieee 802.11g features are supported? What is the ISM band? Does the Access Point function as a firewall? Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Security Threats Facing Wireless Networks Wireless-G Access Point Figure C-1 Firmware Upgrade Appendix C Upgrading FirmwareNetwork Neighborhood/My Network Places Appendix D Windows HelpShared Resources Appendix E Glossary Wireless-G Access Point Wireless-G Access Point Wireless-G Access Point Wireless-G Access Point Wireless-G Access Point Wireless-G Access Point Appendix F Specifications Operating Humidity Appendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementInformation section in this Guide Appendix I Contact InformationNeed to contact Linksys?

Related manuals

Manual 2 pages 49.81 Kb