Linksys WTR54GS manual Network Setup, Router IP, Dhcp Server Setting

Page 21

Wireless-G Travel Router with SpeedBooster

Network Setup

The Network Setup section changes the Router’s local network settings. Changes to the Router’s wireless network settings are performed through the Wireless tab.

Router IP

IP Address and Subnet Mask. This shows both the Router’s IP Address and Subnet Mask, as seen by your network. The default IP Address is 192.168.16.1, and the default Subnet Mask is 255.255.255.0. In most cases, keeping the default values will work.

DHCP Server Setting

The settings allow you to configure the Router’s Dynamic Host Configuration Protocol (DHCP) server function. The Router can be used as a DHCP server for your network. A DHCP server automatically assigns an IP address to each computer on your network. If you choose to enable the Router’s DHCP server option, you must make sure there is no other DHCP server on your network.

DHCP Server. DHCP is enabled by factory default. If you already have a DHCP server on your network, or you don’t want a DHCP server, then select Disabled (no other DHCP features will be available).

Static DHCP. Every time a PC reboots, it is assigned a new local IP address by the Router. If you want a PC to be assigned the same IP address every time it reboots, then click the Static IP button.

On the DHCP Client List screen, enter the static local IP address in the Assign this IP field, and enter the MAC address of the PC in the To this MAC field. Then click the Enabled checkbox. When you have finished your entries, click the Save Settings button to save your changes. Click the Cancel Changes button to cancel your changes. To exit this screen, click the Close button.

If you want to see a list of DHCP clients, click the DHCP Client Table button. On the DHCP Client Table screen, you will see a list of DHCP clients with the following information: Client Name, Interface, IP Addresse, and MAC Addresse. To save the information, select Static DHCP Client List. From the To Sort by drop-down menu, you can sort the table by Client Name, Interface, IP Address, or MAC Address. To view the most up-to-date information, click the Refresh button. To exit this screen, click the Close button.

Start IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. Because the Router’s default IP address is 192.168.16.1, the Starting IP Address must be 192.168.16.2 or greater, but smaller than 192.168.16.254. The default Starting IP Address is 192.168.16.100.

Maximum Number of Users. Enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. This number cannot be greater than 253. The default is 50.

Chapter 5: Configuring the Wireless-G Travel Router with SpeedBooster

Figure 5-10: Static DHCP Client List

Figure 5-11: DHCP Client Table

15

The Setup Tab - Basic Setup

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Front Panel Router’s Power Plug and Slide26 Access Restrictions Tab Internet Access Policy Welcome IntroductionWhat’s in this Guide? Wireless-G Travel Router with SpeedBooster Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Front Panel Router’s ports, LEDs, and buttons are located here PowerPower Plug and Slide Within Most of the Western HemisphereOutside of the Western Hemisphere Connecting the Wireless-G Travel Router with SpeedBooster Hardware InstallationOverview Connecting to the PC Configuring the Wireless-G Travel Router with SpeedBooster Setup Tab Basic Setup How to Access the Web-based UtilityInternet Setup Incoming Internet TypeWireless Internet Type Wired Internet TypeInternet Connection Type Packet a unit of data sent over a network Static IP Connection TypePptp Connection Type Optional SettingsNetwork Setup Dhcp Server SettingRouter IP Time Settings Setup Tab DdnsMAC Address Clone Setup Tab MAC Address CloneMac address the unique address that a Manufacturer assigns to each networking device15 Setup Tab Advanced Routing Setup Tab Advanced RoutingBasic Wireless Settings Wireless Tab Basic Wireless SettingsWireless-G Travel Router with SpeedBooster Wireless Security Wireless Tab Wireless Security21 Wireless Tab Wireless Security WPA2-Mixed Wireless MAC Filter Wireless Tab Wireless MAC FilterAccess Restriction Wireless Client ListAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Travel Router with SpeedBooster Firewall Security Tab FirewallVPN Passthrough Security Tab VPN PassthroughAccess Restrictions Tab Internet Access Policy Internet Access PolicyTo create an Internet Access policy 29 Access Restrictions Tab Internet Access PCs List Port Range Forwarding Applications and Gaming Tab Port Range ForwardingWireless-G Travel Router with SpeedBooster Port Range Triggering Applications & Gaming Tab Port Range TriggeringDMZ Applications and Gaming Tab DMZRouter Access Administration Tab ManagementRemote Access ManagementBackup and Restore Log Administration Tab LogAdministration Tab Diagnostics DiagnosticsPing Test Administration Tab Firmware Upgrade Administration Tab Factory DefaultsFactory Defaults Firmware UpgradeStatus Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkDhcp Server Wireless Network Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Travel Router with SpeedBooster Open a command prompt. For Windows 98SE and Me Protocol IP Address Enabled ApplicationStart ~ End Port Can’t get the Internet game, server, or application to work Application Start ~ End Port Protocol IP Address EnabledWireless-G Travel Router with SpeedBooster Need to upgrade the firmware To start over, I need to set the Router to factory defaultFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Where is the Router installed on the network? Frequently Asked QuestionsIs IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What are the advanced features of the Router? What is DMZ Hosting?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11b standard? What is the Ieee 802.11a standard?What is the Ieee 802.11g standard? What Ieee 802.11a features are supported?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is ad-hoc mode? What is infrastructure mode?What is Spread Spectrum? What is ISM band?What is DSSS? What is FHSS? And what are their differences? What is WEP?How do I resolve issues with signal loss? How do I reset the Router?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Travel Router with SpeedBooster Appendix C Upgrading Firmware Appendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFor the Router’s Web-based Utility Figure E-4 Wireless MAC Filter ListAppendix F Glossary Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Appendix G Specifications Storage Humidity Appendix H Warranty Information Appendix I Regulatory Information Radio EN 300 EMC EN 301 489-1, EN 301 Safety ENBelgium Location Frequency Range MHz Power Eirp Applicable Power Levels in FranceOpen the Wireless Network Connection window FCC Statement Appendix J Contact Information Europe Mail AddressOutside of Europe Mail Address Asia Pacific

WTR54GS specifications

The Linksys WTR54GS is a robust wireless router that combines performance and ease of use for home and small office networks. With its sleek design and advanced technology, it caters to users seeking reliable connectivity for multiple devices. One of its standout features is the Wireless-G technology, which provides a maximum data transfer rate of up to 54 Mbps. This makes it ideal for streaming videos, online gaming, and facilitating smooth internet browsing.

The WTR54GS supports 802.11g standards, ensuring compatibility with a wide range of devices, including laptops, smartphones, and tablets. It also supports backward compatibility with 802.11b devices, which is essential for users with older equipment. Enhanced by SpeedBooster technology, the WTR54GS improves performance by increasing the range and speed of the wireless connection, which is particularly beneficial in larger homes or offices where signal strength might be a concern.

Security is a top priority for the Linksys WTR54GS, offering robust features such as WEP, WPA, and WPA2 encryption protocols. This ensures that users can maintain a secure connection while protecting sensitive data from unauthorized access. Additionally, the router features a built-in firewall that helps defend against potential intrusions, providing an added layer of security for the network.

Equipped with four Ethernet ports, the WTR54GS enables users to connect wired devices for more stable and faster connections. This is particularly useful for activities that require high bandwidth, such as video conferencing or online gaming. The router also includes an intuitive web-based setup interface, allowing users to configure and manage their network settings effortlessly.

Another notable characteristic of the Linksys WTR54GS is its support for Quality of Service (QoS) features, which prioritize bandwidth for important applications, ensuring that critical tasks receive the necessary resources for optimal performance. This is particularly useful for households with multiple users and devices competing for bandwidth.

Overall, the Linksys WTR54GS is a versatile and reliable router that provides excellent performance for various networking needs. With its combination of speed, security, and user-friendly features, it remains a popular choice for those looking to enhance their wireless networking experience.
Top Page Image Contents