Linksys WTR54GS manual To start over, I need to set the Router to factory default

Page 54

Wireless-G Travel Router with SpeedBooster

11.To start over, I need to set the Router to factory default.

Hold the Reset button for 8 seconds and then release it. This will return the password, forwarding, and other settings on the Router to the factory default settings. In other words, the Router will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys website and download the latest firmware at www.linksys.com/international.

Follow these steps:

1.Go to the Linksys website at www.linksys.com/international and download the latest firmware.

2.To upgrade the firmware, follow the steps in “Appendix C: Upgrading Firmware.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

•If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

•Set a static IP address on the PC; refer to “Problem #2, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.16.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.16.1

•Perform the upgrade using the TFTP program or the Administration tab of the Router’s web-based utility.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

•There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

1.To connect to the Router, go to the web browser, and enter http://192.168.16.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.On the Setup screen, select the option Keep Alive, and set the Redial Period option at 20 (seconds).

4.Click the Save Settings button.

5.Click the Status tab, and click the Connect button.

6.You may see the login status display as Connecting. Press the F5 key to refresh the screen, until you see the login status display as Connected.

•Click the Save Settings button to continue.

•If the connection is lost again, follow steps 1- 6 to re-establish connection.

Appendix A: Troubleshooting

48

Common Problems and Solutions

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Common Problems and Solutions Frequently Asked Questions Appendix a TroubleshootingAppendix B Wireless Security Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Power Plug and Slide Router’s Front Panel26 Access Restrictions Tab Internet Access Policy Introduction WelcomeWhat’s in this Guide? Wireless-G Travel Router with SpeedBooster Ssid your wireless network’s name Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Network TopologyPlanning Your Wireless Network Network Layout Router’s ports, LEDs, and buttons are located here Power Front PanelPower Plug and Slide Within Most of the Western HemisphereOutside of the Western Hemisphere Connecting the Wireless-G Travel Router with SpeedBooster Hardware InstallationOverview Connecting to the PC Configuring the Wireless-G Travel Router with SpeedBooster Internet Setup How to Access the Web-based UtilitySetup Tab Basic Setup Incoming Internet TypeWireless Internet Type Wired Internet TypeInternet Connection Type Static IP Connection Type Packet a unit of data sent over a networkOptional Settings Pptp Connection TypeNetwork Setup Dhcp Server SettingRouter IP Setup Tab Ddns Time SettingsMac address the unique address that a Setup Tab MAC Address CloneMAC Address Clone Manufacturer assigns to each networking deviceSetup Tab Advanced Routing 15 Setup Tab Advanced RoutingWireless Tab Basic Wireless Settings Basic Wireless SettingsWireless-G Travel Router with SpeedBooster Wireless Tab Wireless Security Wireless Security21 Wireless Tab Wireless Security WPA2-Mixed Access Restriction Wireless Tab Wireless MAC FilterWireless MAC Filter Wireless Client ListWireless Tab Advanced Wireless Settings Advanced WirelessWireless-G Travel Router with SpeedBooster Security Tab Firewall FirewallSecurity Tab VPN Passthrough VPN PassthroughAccess Restrictions Tab Internet Access Policy Internet Access PolicyTo create an Internet Access policy 29 Access Restrictions Tab Internet Access PCs List Applications and Gaming Tab Port Range Forwarding Port Range ForwardingWireless-G Travel Router with SpeedBooster Applications & Gaming Tab Port Range Triggering Port Range TriggeringApplications and Gaming Tab DMZ DMZRemote Access Administration Tab ManagementRouter Access ManagementBackup and Restore Administration Tab Log LogAdministration Tab Diagnostics DiagnosticsPing Test Factory Defaults Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Firmware UpgradeStatus Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkDhcp Server Status Tab Wireless Wireless NetworkAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Travel Router with SpeedBooster Open a command prompt. For Windows 98SE and Me Protocol IP Address Enabled ApplicationStart ~ End Port Application Start ~ End Port Protocol IP Address Enabled Can’t get the Internet game, server, or application to workWireless-G Travel Router with SpeedBooster Firmware upgrade failed, and/or the Power LED is flashing To start over, I need to set the Router to factory defaultNeed to upgrade the firmware My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Is IPSec Pass-Through supported by the Router? Frequently Asked QuestionsWhere is the Router installed on the network? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? Will the Router function in a Macintosh environment? What is DMZ Hosting?What are the advanced features of the Router? Is the Router cross-platform compatible?What is the Ieee 802.11g standard? What is the Ieee 802.11a standard?What is the Ieee 802.11b standard? What Ieee 802.11a features are supported?What is ad-hoc mode? What Ieee 802.11b features are supported?What Ieee 802.11g features are supported? What is infrastructure mode?What is DSSS? What is FHSS? And what are their differences? What is ISM band?What is Spread Spectrum? What is WEP?How do I reset the Router? How do I resolve issues with signal loss?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Travel Router with SpeedBooster Appendix C Upgrading Firmware Appendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 98SE or Me Instructions Windows 2000 or XP InstructionsFigure E-4 Wireless MAC Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Appendix G Specifications Storage Humidity Appendix H Warranty Information Radio EN 300 EMC EN 301 489-1, EN 301 Safety EN Appendix I Regulatory InformationBelgium Applicable Power Levels in France Location Frequency Range MHz Power EirpOpen the Wireless Network Connection window FCC Statement Appendix J Contact Information Europe Mail AddressOutside of Europe Mail Address Asia Pacific

WTR54GS specifications

The Linksys WTR54GS is a robust wireless router that combines performance and ease of use for home and small office networks. With its sleek design and advanced technology, it caters to users seeking reliable connectivity for multiple devices. One of its standout features is the Wireless-G technology, which provides a maximum data transfer rate of up to 54 Mbps. This makes it ideal for streaming videos, online gaming, and facilitating smooth internet browsing.

The WTR54GS supports 802.11g standards, ensuring compatibility with a wide range of devices, including laptops, smartphones, and tablets. It also supports backward compatibility with 802.11b devices, which is essential for users with older equipment. Enhanced by SpeedBooster technology, the WTR54GS improves performance by increasing the range and speed of the wireless connection, which is particularly beneficial in larger homes or offices where signal strength might be a concern.

Security is a top priority for the Linksys WTR54GS, offering robust features such as WEP, WPA, and WPA2 encryption protocols. This ensures that users can maintain a secure connection while protecting sensitive data from unauthorized access. Additionally, the router features a built-in firewall that helps defend against potential intrusions, providing an added layer of security for the network.

Equipped with four Ethernet ports, the WTR54GS enables users to connect wired devices for more stable and faster connections. This is particularly useful for activities that require high bandwidth, such as video conferencing or online gaming. The router also includes an intuitive web-based setup interface, allowing users to configure and manage their network settings effortlessly.

Another notable characteristic of the Linksys WTR54GS is its support for Quality of Service (QoS) features, which prioritize bandwidth for important applications, ensuring that critical tasks receive the necessary resources for optimal performance. This is particularly useful for households with multiple users and devices competing for bandwidth.

Overall, the Linksys WTR54GS is a versatile and reliable router that provides excellent performance for various networking needs. With its combination of speed, security, and user-friendly features, it remains a popular choice for those looking to enhance their wireless networking experience.
Top Page Image Contents