Linksys WTR54GS What Ieee 802.11b features are supported?, What is ad-hoc mode?, What is roaming?

Page 60

Wireless-G Travel Router with SpeedBooster

What IEEE 802.11b features are supported?

The product supports the following IEEE 802.11b functions:

•CSMA/CA plus Acknowledge protocol

•Multi-Channel Roaming

•Automatic Rate Selection

•RTS/CTS feature

•Fragmentation

•Power Management

What IEEE 802.11g features are supported?

The product supports the following IEEE 802.11g functions:

•CSMA/CA plus Acknowledge protocol

•OFDM protocol

•Multi-Channel Roaming

•Automatic Rate Selection

•RTS/CTS feature

•Fragmentation

•Power Management

What is ad-hoc mode?

When a wireless network is set to ad-hoc mode, the wireless-equipped computers are configured to communicate directly with each other. The ad-hoc wireless network will not communicate with any wired network.

What is infrastructure mode?

When a wireless network is set to infrastructure mode, the wireless network is configured to communicate with a wired network through a wireless access point.

What is roaming?

Roaming is the ability of a portable computer to communicate continuously while moving freely throughout an area greater than that covered by a single access point. Before using the roaming function, the user must make sure that the workstation uses the same channel number as the access point of the dedicated coverage area.

To achieve true seamless connectivity, the wireless LAN must incorporate a number of different functions. Each node and access point, for example, must always acknowledge receipt of each message. Each node must maintain contact with the wireless network even when not actually transmitting data. Achieving these functions simultaneously requires a dynamic RF networking technology that links access points and nodes. In such a system, the user’s end node undertakes a search for the best possible access to the system. First, it evaluates such factors as signal strength and quality, as well as the message load currently being carried by each access point and the distance of each access point to the wired backbone. Based on that information, the node next

Appendix A: Troubleshooting

54

Frequently Asked Questions

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix a Troubleshooting Appendix B Wireless SecurityCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Power Plug and Slide Router’s Front Panel26 Access Restrictions Tab Internet Access Policy Introduction WelcomeWhat’s in this Guide? Wireless-G Travel Router with SpeedBooster Planning Your Wireless Network Ad-Hoc versus Infrastructure ModeSsid your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Router’s ports, LEDs, and buttons are located here Power Front PanelPower Plug and Slide Within Most of the Western HemisphereOutside of the Western Hemisphere Connecting the Wireless-G Travel Router with SpeedBooster Hardware InstallationOverview Connecting to the PC Configuring the Wireless-G Travel Router with SpeedBooster How to Access the Web-based Utility Setup Tab Basic SetupInternet Setup Incoming Internet TypeWireless Internet Type Wired Internet TypeInternet Connection Type Static IP Connection Type Packet a unit of data sent over a networkOptional Settings Pptp Connection TypeNetwork Setup Dhcp Server SettingRouter IP Setup Tab Ddns Time SettingsSetup Tab MAC Address Clone MAC Address CloneMac address the unique address that a Manufacturer assigns to each networking deviceSetup Tab Advanced Routing 15 Setup Tab Advanced RoutingWireless Tab Basic Wireless Settings Basic Wireless SettingsWireless-G Travel Router with SpeedBooster Wireless Tab Wireless Security Wireless Security21 Wireless Tab Wireless Security WPA2-Mixed Wireless Tab Wireless MAC Filter Wireless MAC FilterAccess Restriction Wireless Client ListWireless Tab Advanced Wireless Settings Advanced WirelessWireless-G Travel Router with SpeedBooster Security Tab Firewall FirewallSecurity Tab VPN Passthrough VPN PassthroughAccess Restrictions Tab Internet Access Policy Internet Access PolicyTo create an Internet Access policy 29 Access Restrictions Tab Internet Access PCs List Applications and Gaming Tab Port Range Forwarding Port Range ForwardingWireless-G Travel Router with SpeedBooster Applications & Gaming Tab Port Range Triggering Port Range TriggeringApplications and Gaming Tab DMZ DMZAdministration Tab Management Router AccessRemote Access ManagementBackup and Restore Administration Tab Log LogAdministration Tab Diagnostics DiagnosticsPing Test Administration Tab Factory Defaults Administration Tab Firmware UpgradeFactory Defaults Firmware UpgradeStatus Tab Router Router InformationInternet Connection Status Tab Local Network Local NetworkDhcp Server Status Tab Wireless Wireless NetworkAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Travel Router with SpeedBooster Open a command prompt. For Windows 98SE and Me Protocol IP Address Enabled ApplicationStart ~ End Port Application Start ~ End Port Protocol IP Address Enabled Can’t get the Internet game, server, or application to workWireless-G Travel Router with SpeedBooster To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Frequently Asked Questions Where is the Router installed on the network?Is IPSec Pass-Through supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What is DMZ Hosting? What are the advanced features of the Router?Will the Router function in a Macintosh environment? Is the Router cross-platform compatible?What is the Ieee 802.11a standard? What is the Ieee 802.11b standard?What is the Ieee 802.11g standard? What Ieee 802.11a features are supported?What Ieee 802.11b features are supported? What Ieee 802.11g features are supported?What is ad-hoc mode? What is infrastructure mode?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?How do I reset the Router? How do I resolve issues with signal loss?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Travel Router with SpeedBooster Appendix C Upgrading Firmware Appendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 98SE or Me Instructions Windows 2000 or XP InstructionsFigure E-4 Wireless MAC Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Wireless-G Travel Router with SpeedBooster Appendix G Specifications Storage Humidity Appendix H Warranty Information Radio EN 300 EMC EN 301 489-1, EN 301 Safety EN Appendix I Regulatory InformationBelgium Applicable Power Levels in France Location Frequency Range MHz Power EirpOpen the Wireless Network Connection window FCC Statement Appendix J Contact Information Europe Mail AddressOutside of Europe Mail Address Asia Pacific

WTR54GS specifications

The Linksys WTR54GS is a robust wireless router that combines performance and ease of use for home and small office networks. With its sleek design and advanced technology, it caters to users seeking reliable connectivity for multiple devices. One of its standout features is the Wireless-G technology, which provides a maximum data transfer rate of up to 54 Mbps. This makes it ideal for streaming videos, online gaming, and facilitating smooth internet browsing.

The WTR54GS supports 802.11g standards, ensuring compatibility with a wide range of devices, including laptops, smartphones, and tablets. It also supports backward compatibility with 802.11b devices, which is essential for users with older equipment. Enhanced by SpeedBooster technology, the WTR54GS improves performance by increasing the range and speed of the wireless connection, which is particularly beneficial in larger homes or offices where signal strength might be a concern.

Security is a top priority for the Linksys WTR54GS, offering robust features such as WEP, WPA, and WPA2 encryption protocols. This ensures that users can maintain a secure connection while protecting sensitive data from unauthorized access. Additionally, the router features a built-in firewall that helps defend against potential intrusions, providing an added layer of security for the network.

Equipped with four Ethernet ports, the WTR54GS enables users to connect wired devices for more stable and faster connections. This is particularly useful for activities that require high bandwidth, such as video conferencing or online gaming. The router also includes an intuitive web-based setup interface, allowing users to configure and manage their network settings effortlessly.

Another notable characteristic of the Linksys WTR54GS is its support for Quality of Service (QoS) features, which prioritize bandwidth for important applications, ensuring that critical tasks receive the necessary resources for optimal performance. This is particularly useful for households with multiple users and devices competing for bandwidth.

Overall, the Linksys WTR54GS is a versatile and reliable router that provides excellent performance for various networking needs. With its combination of speed, security, and user-friendly features, it remains a popular choice for those looking to enhance their wireless networking experience.
Top Page Image Contents