Wireless-G Travel Router with SpeedBooster
The Wireless Tab - Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s radius.
Wireless MAC Filter
To filter wireless users by MAC Address, either permitting or blocking access, click Enabled. If you do not wish to filter users by MAC Address, select Disabled.
Access Restriction
Prevent ONLY PCs listed below to access the wireless network. Clicking this radio button will block wireless access by MAC Address.
Permit ONLY PCs listed below to access the wireless network. Clicking this radio button will allow wireless access by MAC Address.
Wireless Client List
Wireless Client List. Click the Wireless Client MAC List button to display a list of network users by MAC Address. From the To Sort by
Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. Help information is shown on the
Figure 5-22: Wireless Tab - Wireless MAC Filter
Figure 5-23: Wireless Tab - Wireless Client List
Chapter 5: Configuring the | 23 |
The Wireless Tab - Wireless MAC Filter