Linksys WAG54G manual Want to test my Internet connection

Page 54

Wireless-G ADSL Gateway

7.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

8.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

9.Restart the computer if asked.

•For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

1.Click Start and Control Panel.

2.Click the Network and Internet Connections icon and then the Network Connections icon.

3.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

4.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button.

5.Enter a unique IP address that is not used by any other computer on the network connected to the Gateway.

6.Enter the Subnet Mask, 255.255.255.0.

7.Enter the Default Gateway, 192.168.1.1 (Gateway’s default IP address).

8.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

9.Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window.

2.I want to test my Internet connection.

A.Check your TCP/IP settings. For Windows 98, Me, 2000, and XP:

• Refer to Windows Help for details. Make sure Obtain IP address automatically is selected in the settings. For Windows NT 4.0:

• Click Start, Settings, and Control Panel. Double-click the Network icon.

• Click the Protocol tab, and double-click on TCP/IP Protocol.

• When the window appears, make sure you have selected the correct Adapter for your Ethernet adapter and set it for Obtain an IP address from a DHCP server.

• Click the OK button in the TCP/IP Protocol Properties window, and click the Close button in the Network window.

• Restart the computer if asked.

B.Open a command prompt.

Appendix A: Troubleshooting

46

Common Problems and Solutions

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Wireless- G How to Use this Guide Copyright and TrademarksWord definition Table of Contents Wireless-G Adsl Gateway Network Computer-to-VPN Gateway23 VPN Settings Summary Figure C-9 New Rule Properties Introduction WelcomeWhat’s in this Guide? Wireless-G Adsl Gateway IP Addresses Planning Your NetworkGateway’s Functions What’s an IP Address?What is a VPN? Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses Why do I need a VPN? VPN Gateway to VPN GatewayMAC Address Spoofing Data SniffingGetting to Know the Wireless-G Adsl Gateway Back PanelWhile establishing the Adsl connection Front PanelIndication of any network activity InternetConnecting the Wireless-G Adsl Gateway OverviewWired Connection to a Computer Ethernet ConnectionWireless Connection to a Computer Wireless Configuring the GatewaySetup SecurityApplications & Gaming Access RestrictionsAdministration StatusInternet Setup How to Access the Web-based UtilitySetup Tab Multiplexing Select LLC or VC , depending on your ISPRFC 1483 Bridged Dynamic IP Static IPVirtual Circuit Enter the VPI and VCI ranges in the fields RFC 1483 Routed RFC 2516 PPPoEBridged Mode Only RFC 2364 PPPoAOptional Settings Required by some ISPs Network SetupDdns Tab DynDNS.orgTZO.com Advanced Routing Tab Advanced Routing13 Routing Table Wireless Tab Basic Wireless Settings TabWireless Network Wireless Security Tab 15 WPA Pre-Shared Key17 WEP Wireless Access Tab Wireless Network AccessAdvanced Wireless Settings Tab Advanced WirelessSecurity Tab FirewallAdditional Filters Local Security Gateway 22 VPNManual 24 Manual Key ManagementAdvanced VPN Tunnel Setup 26 Advanced VPN Tunnel SetupConfiguring the Gateway Security Tab Access Restrictions Tab Internet Access29 List of PCs Applications and Gaming Tab Single Port ForwardingPort Range Forwarding Port Triggering 33 Port TriggeringThis setting allows you to specify traffic queue priority Advanced QoSApplication-based QoS Administration Tab Gateway AccessManagement Reporting UPnPEmail Alerts Factory Defaults DiagnosticsBackup&Restore Ping TestFirmware Upgrade RebootUpgrade from LAN Gateway Information Status TabGateway Internet ConnectionsLocal Network 45 Local Network47 Wireless DSL Connection 49 DSL ConnectionAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP IP AddressCan’t get the Internet game, server, or application to work Firmware upgrade failed, and/or the Power LED is flashing To start over, I need to set the Gateway to factory defaultNeed to upgrade the firmware My DSL service’s PPPoE is always disconnectingPower LED flashes continuously Is IPSec Passthrough supported by the Gateway? Frequently Asked QuestionsWhere is the Gateway installed on the network? Does the Gateway support IPX or AppleTalk?Does the Gateway support ICQ send file? Will the Gateway function in a Macintosh environment? What is DMZ Hosting?What are the advanced features of the Gateway? Is the Gateway cross-platform compatible?What is ad-hoc mode? What is the Ieee 802.11g standard?What Ieee 802.11b and 802.11g features are supported? What is infrastructure mode?What is the ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? How do I reset the Gateway? What is WEP?What is a MAC Address? How do I resolve issues with signal loss?Appendix B Wireless Security Important Information for Wireless ProductsWireless-G Adsl Gateway Wireless-G Adsl Gateway Environment WAG54GBuild Filter Lists How to Establish a Secure IPSec TunnelCreate an IPSec Policy Filter List 1 win-RouterFilter List 2 Router -win Figure C-4 IP Filter LIstFigure C-7 IP Filter List Configure Individual Tunnel Rules Tunnel 1 win-RouterFigure C-13 Authentication Methods Figure C-16 Tunnel Setting Tab Tunnel 2 Router-winFigure C-19 IP Filter List Tab Figure C-22 Preshared Key Assign New IPSec Policy Figure C-25 Connection TypeCreate a Tunnel Through the Web-Based Utility Figure C-28 VPN TabFigure D-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions Figure D-3 MAC Address/Physical AddressUpgrade from WAN Appendix E Upgrading FirmwareAppendix F Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Annex-B, WAG54G-DE UR-2 Appendix G SpecificationsStandards Operating Temp 0ºC to 40ºCStorage Temp 20ºC to 70ºC Operating Humidity Storage Humidity10% to 85% Non-Condensing Appendix H Regulatory Information FCC StatementWireless-G Adsl Gateway Radio EN 300 EMC EN 301 489-1, EN 301 Safety EN Applicable Power Levels in France Location Frequency Range MHz Power EirpBelgium Wireless-G Adsl Gateway Open the Wireless Network Connection window Appendix I Warranty Information Appendix J Contact Information Europe Mail AddressOutside of Europe Mail Address
Top Page Image Contents