Linksys WAG54G manual Administration Tab, Management, Gateway Access

Wireless-G ADSL Gateway

Enable 802.1p P bits scheduling. VLAN’s VID. Select this option to enable 802.1p P bits classification scheduling in the appropriate VLAN based on IEEE 802.1Q VLAN identification. Enter the VLAN VID (VLAN Identifier) number in the field.

When you have finished making changes to this screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes.

The Administration Tab

Management

The Management screen allows you to change the Gateway’s access settings as well as configure the SNMP (Simple Network Management Protocol) and UPnP (Universal Plug and Play) features.

Gateway Access

Local Gateway Access. To ensure the Gateway’s security, you will be asked for your password when you access the Gateway’s Web-based Utility. The default username and password is admin.

•Gateway Username. Enter the default admin. It is recommended that you change the default username to one of your choice.

•Gateway Password. It is recommended that you change the default password to one of your choice.

•Re-enter to confirm. Re-enter the Gateway’s new Password to confirm it.

•Remote Gateway Access. This feature allows you to access the Gateway from a remote location, via the Internet.

IMPORTANT: Enabling remote Administration allows anyone with access to your password to configure the Gateway from somewhere else on the Internet.

•Remote Administration. This feature allows you to manage the Gateway from a remote location via the Internet. To enable Remote Administration, click Enabled.

•Administration Port. Enter the port number you will use to remotely access the Gateway.

SNMP

SNMP is a popular network monitoring and management protocol.

Chapter 5: Configuring the Gateway

Figure 5-36: Management

38

The Administration Tab