Linksys WAP300N manual How to view device and local network information

Page 27

Linksys WAP300N

How to view device and local network information

To view device and local network information:

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Status tab, then click the Device Info & Local Network page. Device and network information appears.

Firmware Version—The device’s current firmware version.

Firmware Verification—Used by technical support to verify the firmware.

MAC Address—The device’s Ethernet port MAC address.

IP Address—The device’s IP address, as seen on your local network. Subnet Mask—The subnet mask configured for your local network.

Default Gateway—The default gateway configured for your local network.

Maintaining and Monitoring

How to view wireless network information

To view wireless network information:

1.Log into the browser-based utility (see “How to open the browser-based utility” on page 8).

2.Click the Status tab, then click the Wireless Network page. Wireless network information appears. Available information depends on the current operating mode, although the list below shows all possible fields.

Operation Mode—The current operation mode of the device.

MAC Address—The MAC address of the device’s wireless (Wi-Fi) interface. Link Status—The status of the wireless connection.

Network Name (SSID)—The name of your wireless network. Network Mode—Your wireless network’s network mode. Channel Width—Your wireless network’s channel width (in MHz). Radio Band—Your wireless network’s radio band (in GHz). Channel—Your wireless network’s channel setting. Security—Your wireless network’s security mode.

24

Image 27
Contents User Guide Contents Specifications Package contents OverviewBack view Bottom view What is a network? Setting Up BasicsHow to expand your home network Where to find more helpComputer Tablet Smartphone Access Point ModeOperating modes Internet ModemWireless Media Connector mode Tablet Ethernet-Capable Game Console Wireless Range Extender modeNetwork Printer Wireless Bridge modeEthernet Switch Internet Modem RouterTo open the browser-based utility How to install your WAP300NHow to open the browser-based utility To install your WAP300NHow to use Access Point mode How to select Access Point modeHow to use Wi-Fi Protected Setup How to manually set up your WAP300N Wireless Basic Wireless SettingsTo manually set up your access point How to set up wireless security Click Save SettingsWireless Wireless Security How to use Wireless Media Connector mode How to select Wireless Media Connector modeHow to run a wireless network site survey Information Security mode Required Description How to manually set up your WAP300N Select Wireless Range Extender, then click Save Settings How to use Wireless Range Extender modeHow to select Wireless Range Extender mode To select Wireless Range Extender modeHow to select Wireless Bridge mode How to use Wireless Bridge modeTo set up Wireless Bridge mode How to set up Wireless Bridge ModeHow to set up wireless security Wireless Wireless MAC Filter Setting Up AdvancedHow to set up the MAC filter To set up the MAC filterWireless QoS How to set up QoS Quality of ServiceHow to change the IP address To set up QoSHow to change the password How to change the idle timeoutHow to disable wireless admin access Maintaining and Monitoring TroubleshootingHow to back up and restore your WAP300N configuration How to reboot your WAP300NClick Restore Factory Defaults How to restore your WAP300N’s factory settingsHow to update your WAP300N To restore your WAP300N’s factory settingsTo view device and local network information How to view device and local network informationHow to view wireless network information To view wireless network informationMaintaining and Monitoring Specifications Linksys WAP300NEnvironmental 3425-01640A