Linksys manual Specifications, Linksys WAP300N, Environmental

Page 29

Linksys WAP300N

Specifications

Specifications

Linksys WAP300N

Model	WAP300N
Description	Linksys Wireless-N Access Point
Ethernet Port Speed	10/100 Mbps (Fast Ethernet)
Radio Frequency	2.4 or 5 GHz
Number of Antennas	2
Antenna Type	External dipole antenna with R-SMA connector
Detachable	Yes
Ports	Power, Ethernet
Buttons	Reset, Wi-Fi Protected Setup™,
	Power (European model only)
LEDs	Power, Wi-Fi Protected Setup, Ethernet,
	Wireless
Wireless Security Features	WEP, Wi-Fi Protected Access™ (WPA),
	Wi-Fi Protected Access™ 2 (WPA2),
	Wireless MAC Filtering
Security Key Bits	Up to 128-bit encryption

Environmental

Dimensions	188.7 × 151.7 × 31.2 mm (7.43” × 5.97” × 1.23”)
	without external antennas
Unit Weight	207.0 g (7.3 oz), without external antennas
	229.6 g (8.1 oz), with external antennas
Power	12V, 0.5A
Certifications	FCC, UL/cUL, ICES-003, RSS210, CE, Wi-Fi
	(IEEE 802.11a/b/g/n), WPA2™, WMM®,
	Wi-Fi Protected Setup™
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-20 to 60°C (-4 to 140°F)
Operating Humidity	10 to 80% non-condensing
Storage Humidity	5 to 90% non-condensing

NOTES

For regulatory, warranty, and safety information, see the CD that came with your device or go to Linksys.com/support.

Specifications are subject to change without notice.

Maximum performance derived from IEEE Standard 802.11 specifications. Actual performance can vary, including lower wireless network capacity, data throughput rate, range and coverage. Performance depends on many factors, conditions and variables, including distance from the access point, volume of network traffic, building materials and construction, operating system used, mix of wireless products used, interference and other adverse conditions.

26

Image 29

Contents User Guide Contents Specifications Back view Package contentsOverview Bottom view How to expand your home network Setting Up BasicsWhere to find more help What is a network?Operating modes Access Point ModeInternet Modem Computer Tablet SmartphoneWireless Media Connector mode Tablet Ethernet-Capable Game Console Wireless Range Extender modeEthernet Switch Wireless Bridge modeInternet Modem Router Network PrinterHow to open the browser-based utility How to install your WAP300NTo install your WAP300N To open the browser-based utilityHow to use Wi-Fi Protected Setup How to use Access Point modeHow to select Access Point mode To manually set up your access point How to manually set up your WAP300NWireless Basic Wireless Settings Wireless Wireless Security How to set up wireless securityClick Save Settings How to run a wireless network site survey How to use Wireless Media Connector modeHow to select Wireless Media Connector mode Information Security mode Required Description How to manually set up your WAP300N How to select Wireless Range Extender mode How to use Wireless Range Extender modeTo select Wireless Range Extender mode Select Wireless Range Extender, then click Save SettingsHow to select Wireless Bridge mode How to use Wireless Bridge modeTo set up Wireless Bridge mode How to set up Wireless Bridge ModeHow to set up wireless security How to set up the MAC filter Setting Up AdvancedTo set up the MAC filter Wireless Wireless MAC FilterHow to change the IP address How to set up QoS Quality of ServiceTo set up QoS Wireless QoSHow to disable wireless admin access How to change the passwordHow to change the idle timeout How to back up and restore your WAP300N configuration TroubleshootingHow to reboot your WAP300N Maintaining and MonitoringHow to update your WAP300N How to restore your WAP300N’s factory settingsTo restore your WAP300N’s factory settings Click Restore Factory DefaultsHow to view wireless network information How to view device and local network informationTo view wireless network information To view device and local network informationMaintaining and Monitoring Environmental SpecificationsLinksys WAP300N 3425-01640A