Linksys HPPO200 manual HomeLink Phoneline 10M Cable/DSL Router’s Web-based Utility, Setup

HomeLink™ Series

The HomeLink Phoneline 10M

Cable/DSL Router’s Web-based

Utility

Quick & Easy Administration

The HomeLink Phoneline 10M Cable/DSL Router has an internal integrated- circuit chip but no keyboard, monitor or mouse capabilities. Because of these limitations, an administrative utility has been programmed into that chip. All router-based administrative tasks are performed through this utility. The utility can be accessed by any PC on the network by typing http://192.168.1.1 into the PC’s web browser address window.

Upon entering the address into the web browser, a password request page will pop up.

Leave the User Name field empty, but type “admin” into the Password field.

Phoneline 10M Cable/DSL Router

Setup

On the following pages you will find brief descriptions of each utility web-page and each page’s more important functions. More detailed explanations and instructions can be found by clicking each page’s Help button. To apply any settings you’ve altered on any page, click the Apply button, then click Continue. To clear any values you’ve entered on any page, click Cancel.

The Basic Setup screen is the first screen you will see when you access the Utility. If you have already installed and setup the Router, you have already seen this screen and have already properly configured all of the screen’s values.

•Router Name This entry is necessary for some ISPs.

•Domain Name This entry is necessary for some ISPs.

•Firmware Version This entry shows the version of the firmware you are using. Future versions of the HomeLink Phoneline Router’s Firmware may become available on the Linksys website.