HomeLink™ Series
•DHCP Client Table Click on the Client Table button to show the current DHCP Client information. (This information is stored in temporary memo- ry, so the list of clients could disappear.)
Help
Here you will find links to all of the Utility’s internal support documentation, as well as the application that upgrades the HomeLink Phoneline Router’s firmware. To upgrade the Homelink Phoneline Router’s firmware:
1.Downloaded the latest firmware version from the Linksys website (www.linksys.com).
2.Go to the Help screen (above).
3.Click Upgrade Firmware. A new page will appear (below).
Phoneline 10M Cable/DSL Router
4.Enter the HomeLink Phoneline Router’s administration password into the Password Confirm box.
5.Click the Browse button and find the firmware upgrade file that you down- loaded from the Linksys website.
6.Click the Upgrade button and follow the instructions there.
Filters
Filters block specific internal users from accessing the Internet. You can set up a filter through an IP address or a network Port number.
To Modify Filter Settings
•Enter the IP addresses you wish to filter into the IP address fields. The users who have these IP addresses will not be able to access the Internet.
•You can also filter users by entering their network port number. Enter the port numbers you want to filter into the port numbers fields. Users who are connected to the HomeLink Phoneline Router will no longer be able to access any port number listed there.
23 | 24 |