KitchenAid KEMS308G Audible signals, Choosing cooking function settings, Interrupting cooking

Getting to Know Your Microwave Oven

10A. MICRO. Touch this pad before entering a cooking time when setting a second or third cycle in multi-cycle cooking.

10B. COOK POWER. Touch this pad, after the cook time has been set, followed by a Number pad to set the amount of microwave energy released to cook the food. The higher the number, the high- er the power wattage and the faster the “cooking speed.”

11.BROIL. Touch this pad to broil with the broil element.

12.CRISP. Touch this pad to crisp pre- cooked pizza and other dough-based foods. Use it also for baking and for frying bacon and eggs, sausages, etc.

13.CONVECT/QUICK PREHEAT. (Models KEMS308G, KEMS378G, KBMC147H and KBMC140H only) Touch this pad to put microwave oven into the CONVECT cooking mode.

14.MICROWAVE OVEN CANCEL. Touch this pad to cancel a function. See next page for more information.

15.Number Pads. Touch Number pads to enter cooking times, cook powers, selection, quantities, or weights.

16.See “Lower Electric Convection Oven Use and Care Guide”.

NOTES:

•If you touch one Command pad and then want to choose another Command pad in the same cycle, you must press CANCEL first.

•If you attempt to enter unacceptable instructions three tones will sound. Touch CANCEL and re-enterthe instructions.

Audible signals

Audible signals are available to guide you when setting and using your oven:

•A programming tone will sound each time you touch a pad.

•Four tones signal the end of a cooking cycle or the Minute Timer countdown.

Choosing cooking function settings

The cooking functions discussed in the “Getting to Know Your Microwave Oven” and “Microwave Cooking” sections use Command pads to choose cooking function settings. Another way to choose cooking function set- tings is by using Code pads. Code pads are Number pads used to select a cook power, food settings, or quantities. Food setting charts found in the “Using CUSTOM REHEAT,” “Using CUSTOM DEFROST,” and “Using CUSTOM COOK” sections list only Code pads for food settings. The charts in “Using code pads” in the “Microwave Cooking” section list all the available Code pads.

Interrupting cooking

You can stop the oven during a cycle by opening the door. The oven stops heating and the fan stops, but the light stays on.

To restart cooking for all cycles, close the door and

TOUCH

EASYMINUTE

START

If you do not want to continue cooking:

•Close the door and the light goes off

AND

•TOUCH

MICROWAVE OVEN

CANCEL

10