KitchenAid KBMC147H, KBMC140H Setting the clock, Pan order chart, To set time Choose the clock

Getting to Know Your Microwave Oven

UTENSIL

Broiling Grid	Convection Grid	CRISPWARE™	Crisper Pan Handle
	(Short Legs)	Crisper Pan

HOW TO USE IT

Use for faster browning of small amounts of food. Place the broiling grid securely on the turntable. Using the broiling grid will put food close to the broil element.

Use for CONVECT cooking in the microwave oven. Place the grid securely on the turntable. Using the convection grid, position the food or baking dish in the best location for necessary (or required) air circulation during CONVECT cooking.

Use to give foods such as pizza and pies a nice crisp, brown bottom surface. Do not place any other utensils on the Crisper Pan since the pan quickly becomes very hot and can cause dam- age to the utensil. Always use the turntable as support for the Crisper Pan.

The Crisper Pan is designed specifically for use with the patented Double Emission System in this oven. Do not use Crisper Pan in any other microwave oven or in a thermal oven.

The Crisper Pan is dishwasher safe.

NOTE: Only use wooden or plastic cooking utensils on the Crisper Pan to prevent scratches.

Pan order chart

121⁄4" x 1" (31 cm x 2.54 cm) Crisper Pan P.N. 4375191

111⁄2" x 1" (29 cm x 2.54 cm) Crisper Pan P.N. 4378131

11" x 13⁄8" (28 cm x 3.5 cm) Baking Pan P.N. 4378132

To order additional Crisper or Baking Pans, see the chart at left. Then call

1-800-422-1230and follow the instructions and telephone prompts you hear.

OR

Use the CRISPWARE™ order card included with your Use and Care Guide.

Setting the clock

When your microwave oven is first plugged in or after a power failure, the colon and time of day will flash for 5 minutes. “PF” will show on the lower oven Temperature Display until any pad is touched.

NOTES:

•You can only set the clock when the lower oven and the microwave oven are not cooking food and when the Minute Timer is not counting down.

•You can clear the time of day from the Display by touching and holding CLOCK SET•START for 5 seconds. Touch CLOCK SET•START to see the time of day again.

To set time:

1. Choose the clock.

TOUCH

CLOCK

SETSTART

2. Enter time of day.

Example for 5:30:

TOUCH

5 3 0

CONTROL

LOCK QUANTITY

12