Linksys WRT610N manual Wi-Fi Protected Setup, Method #1, Method #2, Method #3

Page 15

Chapter 3

Advanced Configuration

Standard Channel (2.4 GHz)  Select the channel for Wireless-B,Wireless-GandWireless-N (2.4GHz) networking. If you selected Wide – 40MHz Channel for the Radio Band setting, then the Standard Channel will be a secondary channel for Wireless-N (2.4GHz). If you are not sure which channel to select, keep the default, Auto.

SSID Broadcast  When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router’s SSID, keep the default setting, Enabled. If you do not want to broadcast the Router’s SSID, then select Disabled.

Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes.

Wi-Fi Protected Setup

There are three methods available. Use the method that applies to the client device you are configuring.

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

NOTE: Wi-Fi Protected Setup configures one client device at a time. Repeat the instructions for each client device that supports Wi-Fi Protected Setup.

Method #1

Use this method if your client device has a Wi-Fi Protected Setup button.

1.Click or press the Wi-Fi Protected Setup button on the client device.

2.Click the WiFi Protected Setup button on this screen.

3.After the client device has been configured, click the OK button. Then refer back to your client device or its documentation for further instructions.

Method #2

Use this method if your client device has a Wi-Fi Protected Setup PIN number.

1.Enter the PIN number from the client device in the field on this screen.

2.Click the Register button.

3.After the client device has been configured, click the OK button. Then refer back to your client device or its documentation for further instructions.

Method #3

Use this method if your client device asks for the Router’s PIN number.

1.Enter the PIN number listed on this screen. (It is also listed on the label on the bottom of the Router.)

2.After the client device has been configured, click the OK button. Then refer back to your client device or its documentation for further instructions.

The Wi-Fi Protected Setup Status, Network Name (SSID), Security, Encryption, and Passphrase are displayed at the bottom of the screen.

NOTE: If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices.

Simultaneous Dual-N Band Wireless Router

13

Image 15
Contents Simultaneous Dual-N Band Wireless Router Icon Descriptions Online ResourcesCopyright and Trademarks Table of Contents Appendix E Regulatory Information Appendix C Specifications Appendix D Warranty InformationBack Panel Front PanelWall-Mounting Placement Horizontal PlacementAdditional Security Tips General Network Security GuidelinesLanguage How to Access the Web-Based UtilitySetup Basic Setup Internet SetupAutomatic Configuration Dhcp Static IPPPPoE Telstra Cable Optional SettingsNetwork Setup Network Address Server Settings DhcpRouter Address DynDNS.org Setup DdnsTime Setting Ddns ServiceAdvanced Routing Setup MAC Address CloneSetup Advanced Routing MAC Address CloneWireless Basic Wireless Settings Wireless ConfigurationManual Method #3 Wi-Fi Protected SetupMethod #1 Method #2Wireless Wireless Security Wireless SecuritySecurity Mode Radius WPA2 EnterpriseMAC Address Filter List Wireless Wireless MAC FilterWireless MAC Filter Access RestrictionAdvanced Wireless Wireless Advanced Wireless SettingsWeb Filters Security FirewallSecurity VPN Passthrough FirewallStorage Disk Disk DetailShared Folder Screen Format Disk SetupStorage Media Server Shared FolderAccess Storage FTP ServerFTP Folder Screen User Account Screen Storage AdministrationInformation User ManagementGroup Account Screen Internet AccessTo create an Internet Access Policy Group ManagementApplications and Gaming Single Port Forwarding Single Port ForwardingBlocked Applications Port Triggering Applications and Gaming Port Range ForwardingPort Range Forwarding Applications & Gaming Port TriggeringApplications and Gaming DMZ QoS Quality of ServiceInternet Access Priority WirelessGames CategoryApplications Online GamesVoice Device SummaryMAC Address Ethernet PortLog Administration ManagementAdministration Log Router PasswordAdministration Diagnostics Administration Factory DefaultsAdministration Firmware Upgrade Status Local Network Status Router5GHz/2.4GHz Wireless Network Status Wireless NetworkAppendix a Troubleshooting Instructions for Windows XP How to Install the USB StorageHow to Access the USB Storage OverviewName column, double-click Wrt610n Instructions for Windows Vista Double-Click WRT610N Computer Category Advanced Configuration Advanced Users Only How to Access the Web-Based UtilityHow to Create a Shared Folder How to Change the Server Name How to Create a User GroupInformation, Server Name field enter a new Server name How to Create a User AccountAppendix C Specifications Limited Warranty Obtaining Warranty ServiceExclusions and Limitations Technical Support FCC Radiation Exposure Statement Safety NoticesWireless Disclaimer FCC StatementAvis d’Industrie Canada Restrictions in the 5 GHz BandDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Software in Linksys Products Software LicensesSchedule 1 Linksys Software License Agreement Preamble ScheduleSoftware License Agreement Software License Agreement No Warranty Original SSLeay License OpenSSL License8051510NC-DF