System Setup, AC Power Connection | Aviom A-16CS, A-16R specification

System Setup

Start with all devices turned off. When all power and audio connections have been made, you can then power up all the components in your system.

AC Power Connection

The component parts of your Personal Monitor Mixing System use separate external power supplies.

•Connect the power supply to the 18-24 VDC Power jack on the rear of the analog input module (does not apply when using the Yamaha-compatible Y1 card).

•Plug the power supply into an available AC power outlet.

•Connect the power supply to the A-16R Personal Mixer unit.

•Plug the power supply into an available AC power outlet.

The Personal Monitor System will be in its “on” state as long as it is plugged into a working electrical outlet.

No on/off power switches are included. If you would like to control the power state of your units, simply connect the power supplies to a power strip with an on/off switch. Use that as a system power switch.

Note: The A-16CS gets its power from the A-16R when the A-Control jacks are connected via a Cat-5 cable. No power supply is required.

System Interconnections

A single Category 5 cable is required to connect each A-Net compatible device in your system.

Connect a Category 5 cable from the front panel A-Net jack on the Aviom A-Net input module (AN-16/i, AN-16/i-M, A-16T, or Y1 card) to the A-Net In jack on the first Personal Mixer.

Connect additional A-16, A-16II or A-16R Personal Mixers with a single Category 5 cable from the A-Net Out jack on the first Mixer to the A-Net In jack on the next Personal Mixer. (Repeat this process for

17

Image 27

Aviom A-16CS, A-16R manual System Setup, AC Power Connection, System Interconnections

Contents

User Guide 16R Personal Mixer 16CS Control Surface Aviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Midi I/O Table of Contents Midi Page Welcome Features Button Presses Optional Remote ControlUsing Personal Mixers Conventions Used in this Document Master Volume Control 16R Components left side 16R Front Panel 16R Components right side Audio Connections 16R Rear Panel 16R Midi and Data Connections Left Side 16CS Components 16CS Right Side AC Line Conditioning Package Contents Installing the A-16R in a Rack Channel LabelsMixer Label Strip What is Category 5? Cables Used in the Aviom SystemCategory 6 Cables Cable Lengths Up to 500 feet of Cat-5 cable can be used to connectInfinite number A-Net components About A-Net Power Supply Polarity Power Supplies Cleaning Maintenance System Setup AC Power ConnectionSystem Interconnections Audio Connections Inputs Audio Connections OutputsLabeling the Channels Powering Up Basic NavigationPreparing to Make a Mix Set the Channel Volume MixingSet the Pan Location What Gets Saved Saving Your New Preset Information Not Saved With a Preset Series Connection Parallel A-Net routing using an A-16D A-Net DistributorSystem Navigation Net Connection Options 16D Pro Mixing Operational Modes A-16R Personal Mixer Tone Controls Global Controls the Master Section Button Behaviors Master Volume Making Changes to Channel Settings Before You Start Editing Volume and Pan Control Pan and Volume ControlsPan LEDs Linking Channels Spread ControlSpread turns this Into this, for example Held Solo ModeSolo Modes Single-Channel Solo Muting a Channel Creating Groups Creating Additional Groups Changing Channel Volumes Within a Group Making Changes to a GroupRemoving Channels From a Group Muting Groups Net Connectors DC Power InputAudio Outputs Mono Operation Stereo Operation Balanced Inserts Mix Signal Flow Control Net In and Out Midi I/O Aviom A-16R and A-16CS User Guide Overview A-16CS Front PanelGlobal Controls Master Volume Button Behaviors Changing Channel Settings Channel Volume and Pan ControlAll Volumes Zero Muting a Channel Saving a Mix From the A-16CS Recalling a Preset From the A-16CS A-16CS Rear Panel Display the Current Preset Number Footswitch Jack Midi Jacks Midi Midi Thru 16R Midi Base ChannelMidi Midi Out Midi Automation Midi Data Storage Save One Mix Preset via Midi Saving Presets Saving All Mix Presets via Midi Loading . via Midi Loading One Preset via Midi Exit Midi Mode Loading an All Preset File via MidiPage Problem Can’t hear a Channel that is part of a Group TroubleshootingProblem No audio from the Personal Mixer outputs Problem Can’t change Presets Problem The A-Net LED is on, but there is no sound Problem In Group mode, can’t select a new Channel Problem Don’t know if a Preset was saved Specifications 16R Personal Mixer16CS Control Surface Midi Implementation Chart Version 1.00 for Aviom A-16R Midi System Exclusive Implementation Midi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Index Symbols Index LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration