Creating Additional Groups | Aviom A-16CS, A-16R manual

LED goes out and you are returned to your current Preset and live mix.

In the current Preset, you will now see all Channel LEDs associated with a Group light whenever you press a Channel button that is included in your saved Group. The Channels now behave as one.

Note: Remember to save the Preset if you want to be able to recall the Preset with the new Group settings later.

Creating Additional Groups

Three Groups can be created and saved in each Preset in a Personal Mixer. Each Group can be created and/or edited as needed while live audio is playing through the system. Remember that when using the A-16CS the data is stored in the A-16R, not in the A-16CS itself.

The instructions in the previous section describe how to create and save the first Group in a mix. Creating additional Groups follows the same procedure.

Use these steps to create a second and/or third Group.

•Select a Channel that is not currently part of an existing Group.

•Press the GROUP button to enter Group Mode. The Group LED will flash.

•Double-click any Channels that you want to add to the new Group.

•To save the Group, press the GROUP button again to exit Group Mode. The flashing LED will go out.

Shortcut: While in the Group edit mode, you can start the process of creating a new Group while editing an existing Group. To do this,

•Press a Channel button that is not already part of the current Group being edited. Its red LED will light solid.

•Double-click Channels to add them to a new Group.

•Create a third Group by following the same procedure.

•Exit the Group edit mode to save the Groups.

•Save the Preset.

If you try to create more than three Groups, the interface will automatically select one of the existing Groups when you enter Group edit mode. You have the option at this point to edit an existing Group or clear Channels that are part of one of the other existing Groups.

Note: A Channel that is already part of one Group cannot be part of any other Group.

35

Image 45

Aviom A-16CS, A-16R manual Creating Additional Groups

Contents

User Guide 16R Personal Mixer 16CS Control Surface Aviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Midi I/O Table of Contents Midi Page Welcome Features Using Personal Mixers Optional Remote ControlConventions Used in this Document Button Presses Master Volume Control 16R Components left side 16R Front Panel 16R Components right side Audio Connections 16R Rear Panel 16R Midi and Data Connections Left Side 16CS Components 16CS Right Side AC Line Conditioning Package Contents Installing the A-16R in a Rack Channel LabelsMixer Label Strip What is Category 5? Cables Used in the Aviom SystemCategory 6 Cables Cable Lengths Up to 500 feet of Cat-5 cable can be used to connectInfinite number A-Net components About A-Net Power Supply Polarity Power Supplies Cleaning Maintenance System Setup AC Power ConnectionSystem Interconnections Audio Connections Inputs Audio Connections OutputsLabeling the Channels Powering Up Basic NavigationPreparing to Make a Mix Set the Channel Volume MixingSet the Pan Location What Gets Saved Saving Your New Preset Information Not Saved With a Preset System Navigation Parallel A-Net routing using an A-16D A-Net DistributorNet Connection Options Series Connection 16D Pro Mixing Operational Modes A-16R Personal Mixer Tone Controls Global Controls the Master Section Button Behaviors Master Volume Making Changes to Channel Settings Before You Start Editing Volume and Pan Control Pan and Volume ControlsPan LEDs Linking Channels Spread ControlSpread turns this Solo Modes Held Solo ModeSingle-Channel Solo Into this, for example Muting a Channel Creating Groups Creating Additional Groups Changing Channel Volumes Within a Group Making Changes to a GroupRemoving Channels From a Group Muting Groups Net Connectors DC Power InputAudio Outputs Mono Operation Stereo Operation Balanced Inserts Mix Signal Flow Control Net In and Out Midi I/O Aviom A-16R and A-16CS User Guide Overview A-16CS Front PanelGlobal Controls Master Volume Button Behaviors Changing Channel Settings Channel Volume and Pan ControlAll Volumes Zero Muting a Channel Saving a Mix From the A-16CS Recalling a Preset From the A-16CS A-16CS Rear Panel Display the Current Preset Number Footswitch Jack Midi Jacks Midi Midi 16R Midi Base ChannelMidi Out Midi Thru Midi Automation Midi Data Storage Save One Mix Preset via Midi Saving Presets Saving All Mix Presets via Midi Loading . via Midi Loading One Preset via Midi Exit Midi Mode Loading an All Preset File via MidiPage Problem No audio from the Personal Mixer outputs TroubleshootingProblem Can’t change Presets Problem Can’t hear a Channel that is part of a Group Problem The A-Net LED is on, but there is no sound Problem In Group mode, can’t select a new Channel Problem Don’t know if a Preset was saved Specifications 16R Personal Mixer16CS Control Surface Midi Implementation Chart Version 1.00 for Aviom A-16R Midi System Exclusive Implementation Midi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Index Symbols Index LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration