Aviom A-16R and A-16CS User Guide
Any analog line-level signal can be connected to the Mix In jacks. Some ideas for connected signals to the Mix In jacks include:
•Click Tracks
•Talkback or intercom communications
•Pre-recorded tracks
•Cascading other A-Net mixer outputs
•CD players or other recorded audio devices
The Mix In jacks can accept a wide variety of signal levels without distortion. The connections are balanced TRS jacks.
A-Control
A-Control is a special protocol developed to allow the A-16R to be controlled by a remote device. Only the optional A-16CS Control Surface should be connected to the A-Control jack. The connection uses a standard Cat-5 jack and cable.
With an A-16CS connected to the A-Control jack, the A-16R will respond to mix edits and Preset save/recall commands from as far away as 200 feet (60 meters). Note that the LOCAL/REMOTE switch on the front panel of the A-16R must be in the Remote position in order for the A-16CS to be recognized.
