Aviom A-16R and A-16CS User Guide
| Solo | Mute | In Recall Mode |
| | | All Volumes |
| | | Zero |
| | | Select |
| | | Mute |
13 | 14 | 15 | 16 |
All Volumes Zero
Note: The text on the right side of the A-16CS Control Surface reads “In Recall Mode All Volumes Zero” as a reminder that this function is always available.
Changing Channel Settings
When the A-16CS Control Surface is used to control an A-16R remotely, all edits made on the A-16CS will be reflected immediately on the A-16R.
To make a change to a Channel using the A-16CS Control Surface, first select a Channel by pressing a numbered button. Then the Channel is available for editing.
On the A-16CS Control Surface you can change
•Volume
•Panning for mono channels
•Spread for stereo channels
•Mute status
•Grouping
In addition to these changes, you can use Solo Mode to audition your edits to a Channel while all other Channels are temporarily silenced. All mix editing features function as previously described in the A-16R section of this document.
Channel Volume and Pan Control
When you change the volume of a Channel from the A-16CS, the LEDs in the Volume section of the Personal Mixer and A-16CS will move simultaneously and will indicate the level changes in real time. There are twelve LEDs in the Volume indicator, each capable of displaying two levels, for a total of twenty-four visible lighted steps. When no LEDs are lit, Channel volume is at its minimum setting.
