Aviom A-16R, A-16CS manual Making Changes to Channel Settings

Aviom A-16R and A-16CS User Guide

•The RECALL and GROUP buttons will both flash when held down simultaneously. This is the Save Mode, as indicated by the connecting graphic above the two buttons on the front panel.

•When a Preset is saved, all sixteen Channel buttons will flash briefly to confirm the Preset save operation.

•The SOLO button has one LED. It will light when pressed, indicating that the selected Channel or Group is now being auditioned with all other Channels being muted.

•The MUTE button has no LED in it. Pressing the MUTE button with a Channel selected will silence the Channel and cause the Channel’s lower (yellow) LED to light.

There is also one special button combination, the RECALL button followed by the MUTE button. When used together this combination serves a twofold function:

•If there is a sudden change in the audio volume coming through the monitor system, this button combination silences all audio channels instantly.

•When starting from scratch to create a new mix, use this function to set all sixteen channels to zero volume and all channel pans to the center setting.

12 13 14 15 16

Note: The text on the right side of the label strip reads “In Recall Mode All Volumes Zero” as a reminder that this function is always available.

Making Changes to Channel Settings

The A-16R Personal Mixer has one set of common controls used for mix editing. A simple convention is used: to make a change to a Channel, first select it. Then the Channel is available for editing.

On the Personal Mixer you can change:

•Volume

28