The A-16R can send the following data types from the MIDI Out jack:

Single Preset files - the current system settings includ- ing volume, pan, mute, and group information are transmitted.

All Preset files - the sixteen saved user Presets are transmitted as a single data dump.

The A-16R can receive the following sysex data types:

Single Preset files - saved mix information is loaded into the current mix state.

All Preset files - the A-16R’s current sixteen mix Presets are replaced with the data from a set of sixteen saved Presets.

The A-16R is capable of saving and restoring Presets via MIDI only when the front panel REMOTE/LOCAL switch is in the LOCAL position. In the REMOTE position, MIDI communication is disabled.

Note: The MIDI Thru jack will always echo data appearing at the MIDI In jack regardless of the position of the REMOTE/LOCAL switch.

Saving Presets

The A-16R can save Preset information to the internal memory or via MIDI SysEx any time it is in Save Mode. The A-16R Save Mode is entered by holding down the RECALL and GROUP buttons simultaneously. Holding the RECALL and GROUP button combination flashes the Recall and Group LEDs to indicate that you can save Presets.

To save a Preset to internal memory, you press a numbered Channel button to store the current mix at the selected location.

To save a Preset or group of presets via MIDI, the SOLO and MUTE buttons are used in combination with the RECALL and GROUP buttons.

Save One Mix Preset via MIDI

To save the current mix as a Preset via MIDI SysEx:

1.Recall a Preset (or edit a Preset to create a new mix) including volume, pan, mutes and groups for up to sixteen channels of audio as required. Editing can be done from the front panel of the A-16R or from the optional A-16CS.

57

Page 67
Image 67
Aviom A-16CS, A-16R manual Saving Presets, Save One Mix Preset via Midi