Aviom A-16R manual Saving a Mix From the A-16CS, Recalling a Preset From the A-16CS

Aviom A-16R and A-16CS User Guide

Note: Changes made from the A-16CS will be instantly reflected on the front panel of the connected A-16R Personal Mixer. Remember that the REMOTE/LOCAL switch on the A-16R must be in the REMOTE position in order for messages from the A-16CS to be received.

Saving a Mix From the A-16CS

When creating monitor mixes, you can save your work as a Preset remotely from the A-16CS. The Preset itself is stored in inside the A-16R, not in the A-16CS. This ensures that the mixes you create are always available in the device that is controlling the audio. Also, you can move the A-16CS to another A-16R for remote creation of mixes and Presets without losing any mix information in the original A-16R.

To Save a mix as a Preset:

•Create your mix by setting volume, pan, mutes, and groups as desired.

•On the A-16CS hold down the RECALL and GROUP buttons simultaneously.

•While still holding both buttons, press any numbered Channel button.

•The numbered Channel buttons flash to indicate that the Preset is stored.

Recalling a Preset From the A-16CS

As mentioned previously, your mixes are stored as Presets inside the A-16R. You can recall a mix Preset remotely from the A-16CS. Or, if the A-16CS is not available, the same Presets can be recalled from the front panel of the A-16R.

To recall a Preset from the A-16CS:

•Press the RECALL button.

•The RECALL button will flash.

•Select a numbered button (1 to 16) corresponding to the Preset mix that you want to recall.

•When the button is pressed, the mix is recalled and is now available and can be edited if desired.

When a Preset is selected from the remote control, the same numbered LED on the front panel of the A-16R will flash briefly to indicate that the preset has been loaded.

50