Linksys WRT610N manual Horizontal Placement, Wall-Mounting Placement

Chapter 1

Product Overview

Horizontal Placement

The Router has four rubber feet on its bottom panel. Place the Router on a level surface near an electrical outlet.

Wall-Mounting Placement

The Router has two wall-mount slots on its bottom panel. The distance between the slots is 175.56 mm (6.91 inches).

Two screws are needed to mount the Router.

Suggested Mounting Hardware

4-5 mm	1-1.5 mm	-3.0 mm
		2.5

††Note: Mounting hardware illustrations are not true to scale.

NOTE: Linksys is not responsible for damages incurred by unsecure wall-mounting hardware.

Follow these instructions:

1.Determine where you want to mount the Router. Make sure that the wall you use is smooth, flat, dry, and sturdy. Also make sure the location is within reach of an electrical outlet.

2.Drill two holes into the wall. Make sure the holes are 175.56 mm (6.91 inches) apart.

3.Insert a screw into each hole and leave 3 mm (0.12 inches) of its head exposed.

4.Maneuver the Router so the wall-mount slots line up with the two screws.

5.Place the wall-mount slots over the screws and slide the Router down until the screws fit snugly into the wall-mount slots.

175.56 mm

Simultaneous Dual-N Band Wireless Router 4