Chapter 3
Advanced Configuration
Status > Router
Router Information
Firmware Version The version number of the Router’s current firmware is displayed.
Current Time The time set on the Router is displayed.
Internet MAC Address The Router’s MAC address, as seen by your ISP, is displayed.
Router Name The name of the Router is displayed.
Host Name If required by your ISP, this was entered on the Basic Setup screen.
Domain Name If required by your ISP, this was entered on the Basic Setup screen.
Internet Connection
This section shows the current network information. It varies depending on the Internet connection type selected on the Basic Setup screen.
Click Refresh to update the
Status > Local Network
The Local Network screen displays information about the local, wired network.
Status > Local Network
Local Network
Local MAC Address The MAC address of the Router’s local, wired interface is displayed.
Router IP Address The Router’s IP address, as it appears on your local network, is displayed.
Subnet Mask The Subnet Mask of the Router is displayed.
DHCP Server
DHCP Server The status of the Router’s DHCP server function is displayed.
Start IP Address For the range of IP addresses used by devices on your local network, the starting IP address is displayed.
End IP Address For the range of IP addresses used by devices on your local network, the ending IP address is displayed.
DHCP Clients Table Click this button to view a list of computers that are using the Router as a DHCP server.
DHCP Clients Table
DHCP Client Table
The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by Client Name, IP Address, Interface, MAC Address, and Expires Time (how much time is left for the current IP address). To
29 |