Linksys WRP400 manual Chapter Interactive Voice Response Menu, Overview, Menu Commands

Page 35

Chapter 4

Interactive Voice Response Menu

Chapter 4:

Interactive Voice

Response Menu

Overview

This chapter explains how to use the Interactive Voice Response (IVR) Menu to configure the Router’s network settings. Use your telephone’s keypad to enter your commands and select choices, and the Router will use voice responses.

To access the IVR Menu:

1.Use a telephone connected to the Phone 1 or 2 port of the Router. (You can only access the IVR Menu through an analog telephone, not any of the Internet phones.)

2.Press **** (in other words, press the star key four times).

3.Wait until you hear the Router’s response, “Configuration menu. Please enter the option followed by the # (pound) key, or hang up to exit”.

Menu Commands

Refer to the following table that lists actions, commands, menu choices, and descriptions. After you select an option, press the # (pound) key. To exit the menu, hang up the telephone.

If the menu is inactive for more than one minute, the Router will time out. To re-enter the menu, press ****.

Action

Command

Choices

Description

 

 

 

 

 

 

 

Use this command

 

 

 

to enter the IVR

 

 

 

Menu. Ignore

 

 

 

Special Information

 

 

 

Tones (SITs) or other

Enter IVR

****

 

tones until you

Menu

 

hear, “Configuration

 

 

 

 

 

menu. Please enter

 

 

 

the option followed

 

 

 

by the # (pound)

 

 

 

key, or hang up to

 

 

 

exit.”

 

 

 

 

 

 

 

The IVR announces

Check DHCP

100

 

whether DHCP is

 

 

 

enabled or disabled.

 

 

 

 

Check IP

110

 

The IVR announces

Address

 

 

the current IP

 

 

 

address of the

 

 

 

Router.

 

 

 

 

Check

120

 

The IVR announces

Subnet

 

 

the current subnet

Mask

 

 

mask of the Router.

 

 

 

 

Check Static

130

 

The IVR announces

Gateway IP

 

 

the current gateway

Address

 

 

IP address of the

 

 

 

Router.

 

 

 

 

Check MAC

140

 

The IVR announces

Address

 

 

the MAC address

 

 

 

of the Router in

 

 

 

hexadecimal string

 

 

 

format.

 

 

 

 

Check

150

 

The IVR announces

Firmware

 

 

the version number

Version

 

 

of the firmware

 

 

 

running on the

 

 

 

Router.

 

 

 

 

Factory

73738

Confirm -

After the

Reset of the

 

Press 1.

Router requests

Router

 

Cancel -

confirmation, press

 

 

1 to confirm.

Warning:

 

Press *

 

(star).

 

All custom

 

After you hear,

 

 

settings

 

 

“Option successful”,

will be lost,

 

 

hang up the phone.

including

 

 

The Router will

the network

 

 

reboot, and all

and service

 

 

settings will be reset

provider

 

 

to their defaults.

data.

 

 

 

 

 

 

 

Wireless-G Broadband Router with 2 Phone Ports

34

Image 35 Contents
User Guide Copyright and Trademarks About This GuideIcon Descriptions Online ResourcesTable of Contents Interactive Voice Response Menu Back Panel Chapter Product OverviewFront Panel Wall-Mounting Placement Placement PositionsHorizontal Placement Vertical Placement60 mm Additional Security Tips Chapter Wireless Security ChecklistGeneral Network Security Guidelines Internet Setup Chapter Advanced ConfigurationHow to Access the Web-Based Utility Setup Basic SetupPPPoE Static IPTelstra Cable Network SetupOptional Settings Dhcp Reservation Dhcp Server SettingTime Setting Router IPDynDNS.org Setup DdnsDdns Service Advanced Routing Setup MAC Address CloneSetup Advanced Routing MAC Address CloneRouting Table Wireless Basic Wireless SettingsWireless Network WPA Personal Wireless Wireless SecurityWireless Security Security ModeWPA2 Enterprise WPA EnterpriseWireless Client List Wireless Wireless MAC FilterWireless MAC Filter Access RestrictionInternet Filter Advanced WirelessSecurity Firewall FirewallSummary Internet Access PolicySecurity VPN Passthrough VPN PassthroughApplications and Gaming Single Port Forwarding Port Range Forward Applications and Gaming Port Range ForwardSingle Port Forwarding Dhcp Client Table Applications & Gaming Port Range TriggeringApplications and Gaming DMZ Port Range TriggeringApplications and Gaming QoS QoS Quality of ServiceWireless Internet Access PriorityEthernet Port Administration ManagementMAC Address Management Log Administration LogAdministration Diagnostics LogPing Test Administration Factory DefaultsDiagnostics Factory DefaultsStatus Router Administration Firmware UpgradeAdministration Config Management Local Network Status Local NetworkRouter Information Internet ConnectionVoice Info Status Wireless NetworkAccess to the Voice Screens Wireless NetworkLine 1/2 Status System StatusVoice User 1/2 Voice SystemDistinctive Ring Settings Voice Admin LoginSpeed Dial Settings Supplementary Service SettingsOverview Menu CommandsChapter Interactive Voice Response Menu Your computer cannot connect to the Internet Appendix a TroubleshootingRouter does not have a coaxial port for the cable connection Tftp Rtsp Http Appendix B SpecificationsEnvironmental Limited Warranty Appendix C Warranty InformationIndustry Canada Statement Safety Notices and InformationFCC Statement FCC Radiation Exposure StatementTelepermit Statement Wireless DisclaimerAvis d’Industrie Canada Приложими Клаузи Bulgarian Denmark CE MarkingNational Restrictions Technical Documents on Product Usage RestrictionsDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information