Chapter 3
Advanced Configuration
remove a DHCP client, click Delete. To retrieve the most
Status > Wireless Network
The Wireless Network screen displays information about your wireless network(s).
Status > Wireless Network
Wireless Network
Dynamic Channel Selection The setting is displayed.
Channel The channel of the wireless network(s) is displayed.
Mode The wireless mode is displayed.
Wireless Network 1-2
Status information for each wireless network is displayed.
Wireless MAC Address The wireless MAC address of the Router’s local, wireless interface is displayed.
Network Name (SSID) The network name, which is also called the SSID, is displayed.
Security The wireless security method is displayed.
SSID Broadcast The status of the SSID Broadcast feature is displayed.
Access to the Voice Screens
There are two level of access, user and Admin Login. When you click the Voice tab, the Info screen is automatically displayed. If you set a User Password on the System screen, then you will be asked to enter it before the Info screen is displayed.
The Admin Login allows access to more advanced settings. To access administrative screens, click Admin Login, and
enter the user name and password provided by your ITSP. Contact your ITSP for more information. (The factory default Admin Login name and password are admin.)
NOTE: In most cases, you do not need to use the administrative screens. Contact your ITSP for more information.
Voice > Info
The Info screen displays Voice over Internet Protocol (VoIP) information about the Router.
Voice > Info
Product Information
Product Name The model number of the Router is displayed.
Serial Number The serial number of the Router is displayed.
Software Version The version number of the Router software is displayed.
30 |