Wireless-G Broadband Router with SRX200
Windows 2000 or XP Instructions
1.Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button.
2.At the command prompt, enter ipconfig /all. Then press the Enter key.
3.Write down the Physical Address as shown on your computer screen; it is the MAC address for your Ethernet adapter. This appears as a series of numbers and letters.
The MAC address/Physical Address is what you will use for MAC address cloning or MAC filtering.
NOTE: The MAC address is also called the Physical Address.
Another screen will show the Ethernet adapter’s IP address. (Shown in the example as 192.168.1.100.) Your computer may show something different.
For the Router’s Web-based Utility
For MAC address cloning, enter the
Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter
Figure E-4: MAC Address Clone
Figure E-5: Wireless MAC Filter List
65
Windows 2000 or XP Instructions